Owner`s manual

WAVECOM

Sr. owner’s manual 16

jack on the back of the transmitter. The red and white audio plugs are not

used.

Step 4. Plug the mini stereo plug of the RCA adapter into your the card, and the

red and white A/V plugs into the AUDIO LEFT and AUDIO RIGHT jacks

on the back of the transmitter.

Step 5. Plug one end of the provided power adapter into the back of the

WAVECOM

Sr. transmitter and the other end into any 120-volt wall

outlet. Turn the ON/OFF switch to ON position and indicator light should

go on.

Step 6. Locate and orient the transmitter according to the chapter of this manual

titled “Orienting Units for Optimal Performance.”

Connecting the Receiver

How to receive wireless audio/video on your TV

There are two ways to receive wireless audio/video signals on your remote TV

(TV in another location):

w Connect the receiver directly to the remote TV.

w Connect the receiver to a VCR, which is then connected to the TV.

If your TV has picture-in-picture capability, you can view any image transmitted

by WAVECOM

Sr., such as your sleeping baby, on an inset picture while

enjoying other programming on the rest of the screen. Consult the owner’s manual

of your TV for instructions on using this capability.

Step 1. Make sure the WAVECOM

Sr. ON/OFF switch is in the OFF