User's Manual

DS110-3 March ‘02 ©2002 Reg. No. 227 4001, England Page 2
110 / 106 S
ERIES
K
EYFOB
E
NCODERS
R
ADIO
/ I
NFRA
-R
ED
‘110’ Series Keyfob Encoders
Part Number Description
Freq
(MHz)
Range**
(Metres)
Compatible
Decoders
110C1-315AR1 AM Transmitter Keyfob 1 Sw 315.0 50
110C2-315AR1 AM Transmitter Keyfob 2 Sw 315.0 50
110C3-315AR1 AM Transmitter Keyfob 3 Sw 315.0 50
AM-HiRK-315
AM-110C1-433 AM Transmitter Keyfob 1 Sw 433.92 100
AM-110C2-433 AM Transmitter Keyfob 2 Sw 433.92 100
AM-110C3-433 AM Transmitter Keyfob 3 Sw 433.92 100
AM-HiRK-433
AMS-001B-433
AMS-0011-433
AMS-008C3B-433
AMS-105C3A-433
‘IR’ Series Infra Red Keyfob Encoders
These products use the HCS360 Keeloq Encoder Device
Part Number Description
Range**
(Metres)
Compatible
Decoders
AM-106C1-433 IR Transmitter Keyfob 1 Sw 20
AM-106C2-433 IR Transmitter Keyfob 2 Sw 20
AM-106C3-433 IR Transmitter Keyfob 3 Sw 20
IR-105C4A
** Range stated is optimum, direct line of sight. In worst conditions this can be reduced by upto 50%
Mechanical Details
36mm
66mm
Operation
The Tx encoder transmits the KEELOQ code for as long as any push-button switch is depressed.
Operation of the Tx encoder buttons will cause either a momentary or a latching action at the Rx decoder,
depending on the configuration of the Rx decoder.
Battery Supply
The keyfob is supplied with a standard cigarette lighter 12V battery type GP23A or equivalent.
Low Battery
When the unit measures a low battery voltage level, the data transmitted includes a ‘Low battery’ status
flag to the receiver decoder.
Auto Shutoff Feature
After 26seconds of continuous transmission the Keyfobs are programmed shut down. This is to prevent the
battery being drained through accidental operation (i.e. if it is in the users pocket!).