User's Manual

For more information
Call: [phone] Fax: [phone]
[e-mail] www.tensator.com
T01150 - Wireless Operation v2 - Issue 2 JA 16/7/2010
RF Button Issues – Continued
3
Check the hub to see if the
blue light is on at the front of
the unit.
Is there a blue light?
Press the sliver button on the
front of the hub.
Does the hub start? I.e Has the
blue light come on?
Check that the hub’s PSU is
connected and that the PDU is
plugged into the mains.
Is the green light lit on the hub’s
PSU?
No
No
Yes
Wait until the hub has finished
loading i.e. the background
movie is displayed on the main
call forward screen.
Try the button again. If it still
does not work then go back to
the start of the RF button help
chart.
Yes
Check that the CTRX (receiver unit) is
connected into the hub. This connects
via a standard USB cable. The unit is
also powered over the USB
connection. If the unit is not
connected please connect it and wait
about 5 seconds.
Are the buttons working now?
Yes
The power socket may not be
functioning correctly.
Please call technical support.
No
There maybe a configuration
problem.
No