Manual
VIEWPOINT SERVERS
TheViewPoint Server is an active network peripheral which uses Microsofts
DHCP server services to assign IP addresses to PinPoint cell controllers,
receive tag / antenna / distance (TAD) information from the cell controllers and
deliver TAD and alert data to client connected to the local area network. The
server uses standard TCP / IP protocol, and, unless a router is installed, must
be on the same LAN segment as the cell controller. The server runs the full
suite of the ViewPoint 3D-iD software, and PinPoints proprietary services,
Location Service, Alert Service, Tracker Service, Tadder Service and Broker
Service. The server is also where location rules sets, alert information, tag infor-
mation, Cell Controller and antenna profiles are stored and distributed.
SERVER SYSTEM: MINIMUM HARDWARE REQUIREMENTS:
Pentium 133 or better processor
Minimum of 128 MB of RAM
CD ROM drive
3.5 floppy disk drive
10 / 100 Ethernet adapter
500 MB of free HDD space
S
ERVER SYSTEM: MINIMUM SOFTWARE REQUIREMENTS:
Microsoft Windows NT Server version 4.0
Service Pack 3 or higher
TCP / IP protocol
Microsoft Internet Information Server
Microsoft DCHP Server
Microsoft Internet Explorer 4.0 or Netscape Navigator 4.0
NT Option Pack 4
Microsoft Access(optional)