User Manual
Mounting the Antenna
The Antenna mount is intended for flat walls of varying construction.
Please contact your certified 3D-iD system integrator for other mount-
ing applications.
1) Using the appropriate hardware, securely attach the circular base-
plate of the mount to a flat surface in the desired location. Ensure
sufficient clearance is left between the baseplate and any nearby ceilings
and walls to allow for full adjustment of the Antenna once it is mounted.
2) Attach the mounts post to the base plate. Tighten the lock nut with a
pliers.
3) Prepare the Antenna by attaching the small, rectangular mounting
plate to the back of the Antenna with the two (2) included 1/2 screws
and washers.
4) Attach Antenna to mount by aligning the mounting plate on the
Antenna with the threaded bolt at the end of the post and rotating the
Antenna until it stops. Tighten the locknuts to secure the Antenna.
PICTURES OF 1) BASE PLATE AND POST IN WALL
2) BACK OF ANTENNA WITH MOUNTING PLATE