User's Manual

ECLIPSE2 IPCommander User
Manual
Function Blocks available:
•
FM Analogue Modulator and Demodulator
• APCO P25
Modulator and Demodulator
•
CTCSS encode/decode and DCS (Digital Coded Squelch)
• De-emphasis and Pre
-
•
Line Audio gain control
•
Audio Filters (Low pass, High pass, Notch and Bandpass)
• Priority Control
•
EclipseNet IP Networking (TIA
• Voice Reporting
•
Audio Tone Generator
• Signal Path Mixer
6.2. Function Blocks
The Eclipse2 uses function blocks to allow
downloaded to the base station
Typical examples of these configurations are:
•
Repeater with CTCSS encode and decode.
•
Repeater with CTCSS encode/decode and 4Wire + E&M.
•
Base Station with 4Wire + E&M signalling and EclipseNet VoIP Networking.
•
Repeater with EclipseNet VoIP networking.
•
Dual Mode Analogue FM and APCO P25
6.2.1. FM Demodulator
The FM Demodulator provides the function
Standard Channel bandwidths
channel basis,
via the channel menu.
The output can connect to tone decoders, audio filters, de
EclipseNet VoIP Networking.
6.2.2. FM Modulator
The FM
Modulator provides the function
Manual
FM Analogue Modulator and Demodulator
Modulator and Demodulator
CTCSS encode/decode and DCS (Digital Coded Squelch)
-
emphasis
Line Audio gain control
Audio Filters (Low pass, High pass, Notch and Bandpass)
EclipseNet IP Networking (TIA
-102.BAHA AFSI/DFSI).
Audio Tone Generator
The Eclipse2 uses function blocks to allow
various configurations and options to be
downloaded to the base station
, as a predefined signal map.
Typical examples of these configurations are:
Repeater with CTCSS encode and decode.
Repeater with CTCSS encode/decode and 4Wire + E&M.
Base Station with 4Wire + E&M signalling and EclipseNet VoIP Networking.
Repeater with EclipseNet VoIP networking.
Dual Mode Analogue FM and APCO P25
The FM Demodulator provides the function
of
a standard FM analogue receiver.
Standard Channel bandwidths
of 12.5KHz and 25KHz are available,
configured on a per
via the channel menu.
The output can connect to tone decoders, audio filters, de
-
emphasis, line out and
Modulator provides the function
of a standard FM analogue
24
various configurations and options to be
Base Station with 4Wire + E&M signalling and EclipseNet VoIP Networking.
a standard FM analogue receiver.
configured on a per
emphasis, line out and