User's Manual

ECLIPSE2 IPCommander User Manual
40
8. Calibration
The Calibration Menu allows the audio codec, RF Exciter Power and Receiver RSSI values
to be saved to the Reciter Module.
Use the procedures in the Eclispe2 Technical Manual to calibrate the Reciter Module.
8.1. Codec calibration
The Codec calibration stores a reference audio level for the Line In and Front Panel
Microphone audio inputs.
8.2. Output power calibration
The Output Power calibration stores the user entered values measured from a Radio Test
Set. It sets the relationship between the actual power level in the Eclipse 2 and the value,
in units of watts, displayed by IP Commander.
Figure
16
Codec Calibration
Figure
17
RF Power Calibration