Operating instructions

___________________________________________________________________________
RF Technology R800 Page 3
CONTENTS CONTENTS
7.1.2 CTCSS 15
7.1.3 Channel Programming 15
7.1.4 Channel Selection 15
7.1.5 Microprocessor 15
7.2 Physical Configuration 16
7.3 Front Panel Controls, Indicators and Test Points 16
7.3.1 Controls 16
7.3.2 Indicators 16
7.3.3 Test Points 16
7.4 Electrical Specifications 16
7.4.1 Power requirements 17
7.4.2 Frequency Range and Channel Spacing 17
7.4.3 Frequency Synthesizer Step Size 17
7.4.4 Frequency Stability 17
7.4.5 Nominal Antenna Impedance 17
7.4.6 IF Frequencies 17
7.4.7 Sensitivity 17
7.4.8 Selectivity 17
7.4.9 Spurious and Image Rejection 17
7.4.10 Intermodulation 17
7.4.11 Modulation Acceptance BW 18
7.4.12 Noise Squelch 18
7.4.13 Carrier Level Squelch 18
7.4.14 Receiver Frequency Spread 18
7.4.15 Receiver Conducted Spurious Emissions 18
7.4.16 Audio Frequency Response 18
7.4.17 Audio Output Level 18
7.4.18 Audio Distortion 19
7.4.19 Channel Select Input/Output 19
7.4.20 Carrier Operated Switch Output 19
7.4.21 CTCSS 20
7.4.22 External Squelch Input 20
7.5 Connectors 20
7.5.1 Antenna Connector 20
7.5.2 Power & I/O Connector 20
7.5.3 Test Connector 20
B Parts List