Installation Instructions
3
Operating and installation instructions RF-KIT Power Amplifier RF2K-S
1. Explanation of symbols, Environment protection
1.1 Explanation of symbols
Warnings
Warnings are marked by a warning triangle.
In addition, signal words indicate the nature
and severity of the consequences if the mea-
sures to avert the hazard are not followed.
The following signal words are used in this document:
NOTE means that property damage may occur.
WARNING means that serious or even life-threatening personal injury
may occur.
DANGER means that serious or life-threatening personal injury will
occur.
Important information without danger to people or proper-
ty is marked by the adjacent symbol. These informations are
boanded by lines above and below the text.
1.2 Important informations
Symbol Meaning
►
Instruction
➔
Reference to a position in the document
Enumeration/List entry
-
Enumeration/List entry
(2
nd
level)
1.3 Environment protection
Disposal of packaging
The packaging protects the device against damage during transport. The
packaging materials are selected according to environmentally friendly
and disposal-related aspects and thus recyclable.
The return of the remaining packaging parts, such as packaging straps, PE
bags, etc., into the material cycle saves raw materials and reduces waste.
If you plan to dispose of the packing by yourself, please locate the nearest
recycling center.
2. Safety informations
Read these operating and installation instructions carefully and com-
pletely before attempting to install and operate the device!
Keep these operating and installation instructions carefully. These
operating instructions contain important safety and operating
instructions for the use of the RF2K-S linear amplifier.
When selling the device hand this document to the new owner.
There are dangerous voltages inside the device! Before opening the
device:
► Switch off the device by pressing the power switch On/Off (1) at the
front of the device and wait until all cooling fans stop.
► Disconnect the power cable from the Power jack (9).
Follow the instructions of a note to avoid damage to the device!
Follow the instructions of a warning to avoid serious injury!
Please use this linear amplier only according to the instructions in
this manual.
The device is designed only for operation on frequencies of the ama
-
teur radio service. For legal operation you need a valid amateur radio
license.