User's Manual

RFD900x User Manual V2.0
www.rfdesign.com.au
13
8/1/2019
Figure 8-2 Asynchronous mesh topology
It is also possible to establish forwarding between nodes in the network. (See the asynchronous
firmware datasheet for details)
8.3 Multipoint synchronised mesh
The network requires that one of the devices assumes a base role to control the timeslot distribution
of the surrounding radios. If one the nodes is out of the base’s range, communication is still possible
if the parameter SyncAny is properly set.
Figure 8-3 Multipoint mesh topology
Node 1
Node 2
Node 3
Node 0
Node 4
All nodes within range
Node 1
Node 2
Node 3
Node 0
Base
Within base node range