User's Manual
15
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
Operating instructions
Fig. 4: DS30-50-100-300-500-1000 Transmi er Front Panel
Local opera on of the DS30-50-100-300-500-1000 transmi er is actuated via 4
front panel keys and 5 led.
led Status
On/ST-BY Green --> RF On
Yellow --> RF Off
LOCK Not Used
LOCAL Yellow --> TX in Local Mode
Off --> TX in Remote Mode
INTLK Yellow --> TX Externally Locked
Off --> TX Not Externally Locked
FAULT Off --> TX in Normal Opera on
Red Fixed --> Alarm Mode – TX Off
Red Blinking --> Prealarm Mode - TX On but some parameters
are abnormal. Check temperatures, unbalance, refl ected
power etc.
CAUTION!
All the changes to the Transmi er must be done in Local mode.
In this mode the Transmi er is completely manually controlled.
All se ngs are under menu control from LCD colour display with touch screen
except for transmi er “ON/ST-BY” switching and local/remote switch-over.
The current opera ng status is displayed on the LCD colour display with touch
screen. During an opera ng procedure the individual menus, the set func ons and
parameters as well as the polled measured values are shown. LED’s on the front
panel give a status indica on of important opera ng parameters.
In remote control mode, the front panel keys and the LCD colour display with
touch screen are inhibited. In local mode, no se ngs are possible via the remote
control equipment.