User's Manual

43
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
Reset & Upgrade Firmware via Lan Address
This procedure is intended for the upgrade of the internal Firmware of the RFE
Transmi ers.
Requirements
• Personal Computer running Windows versio 7 to 10.
• Standard Lan Cable.
• TFTP Client So ware (f.e. Weird “ tpc_free”)
it can be dowloaded here: h ps://www.weird-solu ons.com/dowloads/
u li es.
• Standard Firmware fi le; (for example “Firmware-TX-7.62b.bin” to upgrade a
transmi er to fi rmware version 7.62b).
Firmware Reset Procedure
1.
Confi gure the PC on the same class of IP addresses of the Transmi er (for
example 192.168.178.1)
2.
Connect it with a cable to the LAN connector on the rear panel (fi gure C1) of the
TX/Amplifi er.
3.
Launch the TFTP Client So ware.
4.
Confi gure the Client as in Figure C2:
- TFTP server:
Lan address of the TX (i.e. 192.168.178.99)
- Opera on:
Upload
- Format:
Binary
- Local File Name: click on the folder bu on and select the fi le, for example
“
Firmware-TX-7.62b.bin”
- Remote File Name:
tx_fi rmware.bin
(
Be carefully
Be carefully
!!! Other fi le name doesn’t
work).