User's Manual

15
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
Operating instructions
Fig. 4: DS30-50-100-300-500-1000 Transmi er Front Panel
Local opera on of the DS30-50-100-300-500-1000 transmi er is actuated via 4
front panel keys and 5 led.
led Status
On/ST-BY Green --> RF On
Yellow --> RF Off
LOCK Not Used
LOCAL Yellow --> TX in Local Mode
Off --> TX in Remote Mode
INTLK Yellow --> TX Externally Locked
Off --> TX Not Externally Locked
FAULT Off --> TX in Normal Opera on
Red Fixed --> Alarm Mode – TX Off
Red Blinking --> Prealarm Mode - TX On but some parameters
are abnormal. Check temperatures, unbalance, refl ected
power etc.
CAUTION!
All the changes to the Transmi er must be done in Local mode.
In this mode the Transmi er is completely manually controlled.
All se ngs are under menu control from LCD colour display with touch screen
except for transmi er “ON/ST-BY” switching and local/remote switch-over.
The current opera ng status is displayed on the LCD colour display with touch
screen. During an opera ng procedure the individual menus, the set func ons and
parameters as well as the polled measured values are shown. LED’s on the front
panel give a status indica on of important opera ng parameters.
In remote control mode, the front panel keys and the LCD colour display with
touch screen are inhibited. In local mode, no se ngs are possible via the remote
control equipment.