User's Manual

Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W
20
Menu
Display and programming of the transmi er is through the LDC display touch screen.
From the fi rst screen at power, as previously explained, can be accessed through the
menu bu on to the submenu of the Audio, Frequency, Power, Se ng, Memories and
Alarm.
Touching a symbol on the display is accessed directly from the menu chosen and you
can implement all the changes you want. Each menu is simple and intui ve without
the need for any manual so that all changes following what appears on the display.
Following are the main screens that allows the display.
That related to memories need an explana on, the transmi er can store six diff erent
se ngs in six memories, these can be called either remotely or locally; This is used in
systems n + 1 in the case of transmi ers reserve. The storing of data, frequency, power,
etc. are possible with the transmi er on the air, without interrup ng transmission.
When storing the display shows “SETTING MEMORIES”, at the end the display will
show all the data chosen.
In the se ngs menu you will fi nd all the possible confi gura ons of the date and
 me, external interlock, LAN confi gura on, se ng a general machine and all measures
concerning the voltages and currents in the transmi er.
Fig. 6: Main menu