User's Manual

Rev 1.3

USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W

The displayed readings are:

• Ipa 1-2-3: currents supplied by the power supplies;

• 3v3/5v0/Serv: service voltages;

• Vpa: Voltage power ampliﬁ er, the voltage with which the RF is working;

• Eﬀ : eﬃ ciency in percent;

• RF: RF heatsink temperature in Celsius degrees;

• Amb: room temperature in Celsius degrees.

In the main panel of se ng, ﬁ nally it is possible to enable or disable:

• FSK

• 19kHZ Out

• GMT En

Lan conﬁ guration

From this panel it is possible to conﬁ gure the connec on parameters to the LAN of

your system Transmi er. You can set the IP address, the Subnet Mask, the Gateway, the

Domain Name Server, and the Network Time Protocol Server address set by default at

193.204.114.232 and you can enable GMT synchroniza on with the server.

Touching the IP address to be conﬁ gured will open the panel for conﬁ guring its

address as shown in the ﬁ gures.

Fig. 14: Lan conﬁ gura on