User's Manual

Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W
30
Address port RS465
The “Addr” bu on allows to set the RS485 communica on port.
Fig. 22: RS485 connector confi gura on panel
19kHz Output Amplitude
This panel allows to change the amplitude of the pilot tone of 19kHz. This signal is
not the one used in the MPX, but a copy of it and it is output of the BNC connector
“19kHz” (H in the fi gure 3 pag 13 of the User Manual).
19kHz Dev Amplitude
This panel allows to change the frequency devia on amplitude of the pilot tone of
19kHz.
19kHz Dev Ph
This panel allows to change the phase devia on of the pilot tone of 19kHz.