User's Manual

Rev 1.3

USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W

Set FSK/ID-Code Settings

You can conﬁ gure the IDCode from the panel se ng. By selec ng the indent with

the slider you can select the number or le er and conﬁ rm with the Enter key, the

le er that staimo changing sara iden ﬁ ed by the color green.

SCREEN ID CODE SETTINGS

The characters input occurs through a slider and forward/back arrows. When the

correct number/le er is shown click on “Enter” to input in the IDCode. Then click on

the next dash and repeat the input un l the IDCode conﬁ gura on is completed.

AES/EBU Settings

From this panel you can set the ra o of the digital audio signal (selected 128 bit or

deselected 256 bit), the deemphasis (Oﬀ or Automa c) and ﬁ nally the value in kHz of

the deemphasis

Fig. 25: ID-Code Se ngs

Fig. 26: AES/EBU Se ngs