User's Manual
Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
42
7. Go on the PC and press the bu on “Upload Now...”; the fi rmware is transferred
to the TX. When the transfer is completed, the TX will restart automa cally.
8. Now the data in the local memory are restored and it is possible to install the
desidered fi rmware version. Repeat the steps from 4 to 7; the only diff erence
is that in the Local File Name must be indicated the fi le name of the fi rmware
that we want to install (for example “Firmware-TX-7.62b.bin”).
9. To make sure the procedure was successfull look under the “Menu” bu on on
the LCD: where is shown the Firmware version loaded in the TX. Make sure it
correspond with the loaded one.
10. Click on the “Menu” bu on; in the second page, on the right side of the
LCD you can verify the TX type and the serial number. Make sure that all the
informa ons are corrects.