User's Manual

Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
40
Reset & Upgrade Firmware via Force bootloader
Appendix C - Upgrade Firmware
To update the fi rmware and access the page for the control of the system it is
necessary to connect the LAN to porat located on the rear panel of the transmi er
shown in Fig. The Set IP address is visible on the fi rst page of the LCD display.
Each RFE Transmi er/Amplifi er have a local memory EPROM that stores some
informa ons about the equipment (i.e. serial number, model, installed op ons and
other info).
It may occur that stored contents will be erased. In this case it’s necessary to use this
Fig. C1: Zoom of the LAN-POE connector on rear view of the transmi er
Requirements
• Personal Computer running Windows versio 7 to 10.
• Standard Lan Cable.
• TFTP Client So ware (f.e. Weird “ tpc_free”)
it can be dowloaded here: h ps://www.weird-solu ons.com/dowloads/
u li es.
• Reset Firmware fi le. This fi le is specifi c for each transmi er/
amplifi er; ask to our support team for the right reset fi le. Be
aware, diff erent reset fi rmware can cause TX malfunc ons.
(for example “Reset-T500A0717044.
bin” can be used only to reset the memory of
the TX with serial T500A0717044).
• Standard Firmware fi le; (for example “Firmware-TX-7.62b.bin” to upgrade a
transmi er to fi rmware version 7.62b).