User's Manual Part 2

DSPbR Series – User’s Manual
Document Number 00000.B Page 40/75
The AC mains IEC320-C19 socket rating is 15 Amps, which is used for the full AC input range from 110V to
240V.
Two industry standard AC mains power cord options are available with the DSPbR. For the Australian market a
2.5 metre cord fitted with a 15 Amp mains plug is provided. For the US market a 2.5 metre cord with a 15 Amp
rated 5-15P mains plug is provided.
Please note that the current rating on the mains wall socket must correspond with the rating of the supplied
mains plug.
DC connection to the DSPbR is via a two terminal 85 Amp rated polarised modular Phoenix connector block
(Phoenix model number HDFK 16A). The polarised DC power cables must be rated to carry the required
current with minimal voltage drop. We recommend the use of 10AWG gauge cable for the 48VDC supply
option.
DC power cables are not provided with the DSPbR.
Warning: Do not attempt to connect or disconnect the power cord as a means to turn on and off the DSPbR.
Turn off the mains power source before connecting or disconnecting the power cord to the DSPbR. Turn on the
mains once the cord is fitted.
We strongly recommend that you consult with a suitably qualified electrician to assist with the installation.
Figure 19 – AC Mains IEC320-C19
Plug and Socket
Figure 20 – DC Cable Termination
Connector Phoenix HDFK 16A