User's Manual Part 1

DSPbR Series – User’s Manual
Document Number 00000.B Page 19/75
Please note that there will be a state change on start-up as the relays are energised and held. Relay “1” is
activated on notification of any major alarm and relay “2” is activated on notification of any minor alarm.
The DSPbR hardware architecture requires a level of understanding in order for the configuration options to be
understood. The following sections provide an elementary explanation of the hardware architecture within the
repeater.
CARRY HANDLE
CARRY HANDLE
PSU REMOVAL HANDLE
CSC CONTROLLER MODULE
AC RESETABLE CIRCUIT BREAKER
Figure 2 – DSPbR Front View
FAN 1
FAN 2
RFFE + BPF MODULES
RFBE + BPF MODULES
DSP MODULE
Ref Gen + Aux MODULE
POWER INPUT
Figure 3 – DSPbR Rear View