User's Manual Part 4

DSPbR Series – User’s Manual
Document Number 00000.B Page 65/75
10. DSPbR ancillary equipment and spares part numbers
Item Description Part Number
1 Dust Filter – Fan (pair) DR1011A
2 Plastic Cover – Fan (pair) DR1012A
3 Mains Power Cord 110VAC IEC320-C19. (USA) DR1063A
4 Mains Power Cord 240VAC IEC320-C19. (Australia) DR1062A
5 Jumper Cable – Standard Ethernet 2m, 2 x RJ45 Conn DR1051A
6 Cell Modem Kit - Multi-band. DR1031A
7 Fuse – 10A Med delay 20x5mm AC PSU DR1074A
8 Blanking Panel – Open Slot DR1013A
9 Label Kit - Yellow Reusable labels (pkt 12) DR1014A
10 Antenna GPS Active DR1032A
11 Antenna Multi-Band Cell Modem 800-2100MHz DR1033A
12 User Manual CD DR1091A
13 Jumper Cable RG142 50Ohm 500mm RG142. 2 x SMA (M) DR1034A
14 Jumper Cable 500mm 2 x RJ11 DR1052A
Recommended spares listing
For a single sub rack DSPbR system, the recommended spares will be as follows;
1 4RU Sub Rack Frame Assembly (common for all PSU and band options)
2 PSU inlet module
DC 48V
AC110V
AC240V
3 PSU
48V DC
110-240VAC Mains
4 CSC Master
5 DSP
4 Ch
8 Ch
6 RF Gen + Aux
RF Gen + Aux + Modem
7 RFFE
Table 5 - Ancillary Equipment and Spare Part Numbers