Operations Manual

Revision 9/21
14190 E. Jewell Avenue Suite 4 Aurora CO 80012 TEL: [phone]
www.rfidinc.com
13.56 MHz High Frequency Reader Operations Manual
12
Section 3 - Operating the Reader
This section explains operational commands and input received back from the Reader, commands,
operating modes, and responses.
Note:
All commands are issued in ASCII CAPITAL letters, and they are preceded by an open square
bracket and ended with a closed square bracket. Some symbols and all numbers are permitted.
No spaces are permitted.
Commands are held in non-volatile memory, meaning that if power is taken away from the Smart
Antenna the last command or settings will be retained when re-powered.
General Commands & Responses (ISO protocol independent)
Tag Data Delivery
Tag data will be sent to the serial port in the following format.
<LF>XXXXXXXX<CR>
Where: <LF> = Line Feed
XXXXXXXX = Tag data
<CR> = Carriage Return