User's Manual Part 20
Table Of Contents
- INTRODUCTION
- GETTING STARTED
- WEB CONFIGURATION
- PC CONFIGURATION
- FACTORY RESET
Enable: Tick to enable Packet Filtering by volume. These 2 settings are used to protect the
limited WLAN bandwidth.
Broadcast Threshold: Enter the number of Broadcast packets (in Packets/second) to be allowed
to travel between WAN and WLAN. Typical values can be 100.
Multicast Threshold: Enter the number of Multicast packets (in Packets/second) to be allowed to
travel between WAN and WLAN. Typical values can be 100.
Page 28