User's Manual Part 20

FACTORY RESET
When you have wrongly configured the Router and wish to start all over again, you can perform a
Factory Reset to restore the Router to its original state. Simply use a paper clip or any pointed
object to press in the hole for 5-10 seconds and release.
The Router would be reset to its original Factory Default configuration:
Router’s Feature Factory Default
WAN WAN is a DHCP client
LAN IP (including WLAN) 10.0.0.1
DHCP Server (including
WLAN)
On.
Lease starts from 10.0.0.2
System Log Off
SSID 11g
Channel 11
Turbo mode Off
MAC Address Control Off
Encryption Off
NAT On
DMZ Off
Port Forwarding Off
Filtering Off. (No block)
Administrator’s Security Off. (No password needed)
Page 37