User Manual
Table Of Contents
- INTRODUCTION
- PACKAGE CONTENTS
- CONNECTIONS
- LED
- BASIC IP NETWORKING
- GETTING STARTED
- CONFIGURATION WIZARD
- CONFIGURATION MENU
- System Summary > Configuration
- System Summary > Associations
- System Summary > Statistics
- System Summary > Site Scan
- Basic > SNTP Setting
- Basic > LAN Setting
- Basic > WAN Setting
- Basic > MAC CLONE
- Wireless > Basic Setting
- Wireless > Advance Setting
- Wireless > MAC Address Control
- DHCP > DHCP Server
- DHCP > DHCP List
- Port Forward > Virtual Server
- Port Forward > ICMP Forward
- Port Forward > DMZ Setting
- Port Forward > UPnP Setting
- Firewall > MAC Filter
- Firewall > IP Filter
- Miscellaneous > Dynamic DNS
- System Tools > System Log
- System Tools > System Admin
- System Tools > Backup/Restore Settings
- System Tools > Firmware Update
- System Tools > Reboot
- FACTORY RESET
- PC CONFIGURATION
- TECHNICAL SUPPORT
Firewall > IP Filter
This page allows you to filter off certain IP addresses at certain time of the day.
LAN IP: Enter the LAN IP address that would be denied access to the Internet. It can be one IP
or a range of IP.
Port: The single LAN port or port range that will be denied access to the Internet.
WAN IP: Enter the WAN IP address that would be denied access to the Internet. It can be one IP
or a range of IP.
Port: The single WAN port or port range that will be denied access to the Internet.
Protocol:
Schedule (Always): Choose this to keep the filter rule always on.
Schedule (Start time): The time when you would like to start blocking the IP Address.
Schedule (Stop time): The time when you would like to stop blocking the IP Address.
Status: Choose to activate or de-activate the filter rule.
Page 31 of 45