User Manual
Table Of Contents
- INTRODUCTION
- PACKAGE CONTENTS
- CONNECTIONS
- LED
- BASIC IP NETWORKING
- GETTING STARTED
- CONFIGURATION WIZARD
- CONFIGURATION MENU
- System Summary > Configuration
- System Summary > Associations
- System Summary > Statistics
- System Summary > Site Scan
- Basic > SNTP Setting
- Basic > LAN Setting
- Basic > WAN Setting
- Basic > MAC CLONE
- Wireless > Basic Setting
- Wireless > Advance Setting
- Wireless > MAC Address Control
- DHCP > DHCP Server
- DHCP > DHCP List
- Port Forward > Virtual Server
- Port Forward > ICMP Forward
- Port Forward > DMZ Setting
- Port Forward > UPnP Setting
- Firewall > MAC Filter
- Firewall > IP Filter
- Miscellaneous > Dynamic DNS
- System Tools > System Log
- System Tools > System Admin
- System Tools > Backup/Restore Settings
- System Tools > Firmware Update
- System Tools > Reboot
- FACTORY RESET
- PC CONFIGURATION
- TECHNICAL SUPPORT
System Tools > Firmware Update
This page allows you to update the firmware (software) in the Router. New firmwares are issued
to improve the performance and add features to the product.
1. The new firmware is a file name “apimg1”.
2. Save the file in your PC.
3. Browse and select the firmware file.
You will see the following page when firmware upgrading is successful.
Do not close the browser or shutdown the Router during firmware upgrading.
Failure to do so will cause serious damage to Router.
System Tools > Reboot
This page allows you to reboot the Router. You must reboot the Router after you have finished
configuring the Router for the new setting to take effect.
Page 35 of 45