Manualshelf

User Manual

ManualsBrandsRFNet Technologies ManualsElectronicsACCESS POINT AND BRIDGE
21222324252627282930
Pg 19 of 30
Filter IPX Packet: Selecting this option will disallow all IPX packets to pass through.
Wireless Isolation: Selecting this option will disallow wireless clients associated with this device to communicate with
each other.
Enable Broadcast Filter: Selecting this option will filter off out broadcast storm.
Broadcast Number Allowed: Select a number in between 10 to 200.
Enable Multicast Filter: Selecting this option will filter off out multicast storm.
Multicast Number Allowed: Select a number in between 10 to 50.
Enable Bandwidth (QoS): Selecting this option will limit the bandwidth on TCP/IP data based on the number entered
in the textbox.
Bandwidth Allowed: Select a number in between 6144 to 7077888 bytes.
Advanced
SNMP Configuration
Enable SNMP: Selecting this option will enable the SNMP feature.
Read Community String: The SNMP Client with this “passphrase” will have “Read” access.
Write Community String: The SNMP Client with this “passphrase” will have “Write” access.
System Contact: To set the MIB2 sysContact OID value.
System Location: To set the MIB2 sysLocation OID value.