User Manual

Pg 20 of 30
Advanced 

Miscellaneous
Enable Telnet: Disable/enable Telnet access to this device.
Save configuration to local device: After you have successfully configured the AP, you can save this “Good Config”
into device memory.
Restore configuration from local device: To retrieve previous “Good Config” to restore the AP back to the working
setting that was previously saved.
Revert to factory setting: If you have even forgotten the password to get into the configuration pages, you would have
to do a Factory Reset to the AP.
Save configuration to local PC: After successfully configured the AP, save this “Good Config” into the computer
system.
Configuration file on local PC: Browse to the location of the saved “Good Config” in the computer system.
Restore configuration from local PC: Allow restoring back to the “Good Config” from the computer system.