User Manual

C.Synchronization(SYNC)
Usersshouldbeawareofthefollowinginformationordosomeoperations
likebelow.
It'sbetterusersdothestep“DeleteSynchronization”belowinthefiring
modulebeforesynchronization.
Onlywhenatransmitter/remotehasalreadybeensynchronizedtoafiring
module,thebothcanworktogether.IfTransmitterBissynchronizedbut
TransmitterAisnotyet,theTransmitterBwillnotfunction.
AfiringmodulecanstorecodesofoneButtonofTransmitterA,one
TransmitterB.Ifuserssynchronizethesametypeoftransmitter/remote
andbutton,theformertransmitter/remoteandbuttonwillbereplaced.
Shifttherodof3-PositionSwitch#2ofthefiring
modulefromOFFtoSYNC-TEST,pressanddon't
release#3SYNC-TESTbuttonmorethan3seconds
untilLEDIndicator#4islit,thenpressonebuttonof
TransmitterAwithin3seconds,LEDIndicator#4
willblinktwiceandthengobacktothestatebeforedoingSYNC,the
buttonofthetransmitter/remoteissynchronizedtothefiringmodule
successfully.
Shifttherodof3-PositionSwitch#2ofthefiringmodulefromOFFto
SYNC-TEST,pressanddon'trelease#3SYNC-TESTbuttonmorethan3
secondsuntilLEDIndicator#4islit,thenpressanybuttonofTransmitter
Bwithin3seconds,LEDIndicator#4willblinktwiceandthengobackto
thestatebeforedoingSYNC,thetransmitter/remotehasbeen
synchronizedtothefiringmodulesuccessfully.
5
Thebuttonʼsnumeralofthetransmitter/remoteisalsorememberedas
the whenthemoduleisimplementingSequentialSequencingNumber
Firing.
C2.SynchronizeTransmitterA
C1.BeforeSynchronization
C3.SynchronizeTransmitterB