Manualshelf

User guide

ManualsBrandsRFXCOM ManualsConsumer electronicsRFXtrx433
11121314151617181920
Copyright 2011-2014, RFXCOM
RFXtrx Version 4.14 page 14 / 35
5.1. Receiver
The RF protocols to be received can be configured on the Main tab at Set Mode.
Click Save Settings to save the selected protocols in non-volatile memory of the RFXtrx. This
configuration is now restored every time after a power up.
Note that these settings are lost after a firmware update and need to be set again.
The received RF data is decoded and displayed in the yellow window.