User guide

RFXtrx Version 4.14 page 9 / 35

2.3. undec on

This parameter is for internal use by RFXCOM!!!

If new sensor types are released they will most probably not be decoded by the RFXtrx

firmware. For this reason we have added the option to enable receive of undecoded messages.

This function is only to enable RFXCOM to add this new sensor type in the firmware if possible.

If “undec on” is enabled in normal use the application will receive a lot of undecoded messages

mostly as a result of RF noise or disturbed RF packets.

Important: For normal use “undec on” should be disabled