Cable Box User Manual

RGB Spectrum, Inc. QuadView HD – Serial Server Set-up 7
Rev. 1 - 8/12/08
7. Connecting your serial control device to the Serial Server
Make the serial connection from the serial control device to the Serial Server.
a. The LES290A Serial Server comes with a DB25-M to DB9-M cable adapter, making the
LES290A Serial Server a DTE device, which will connect, directly to a DCE DB9-F serial
control device.
b. To connect the LES290A Serial Server to another DB9-M DTE device,
such as a PC serial port, you will need to use a DB26-F to DB9-F null modem cable.
Serial cables and adapters are available from many sources including BLACK BOX.
8. Connecting the Serial Server to the QVHD
a. If the connection from the LES290A Serial Server to the QVHD is over a network,
connect both devices to convenient hub, router, or switch ports with straight-through
Ethernet cables.
b. If the connection is point to point connecting only the LES290A Serial Server and the
QVHD, use a crossover Ethernet cable.
Notice: BLACK BOX is a registered trademark of Black Box Corporation.
RGB Spectrum
Corporate Headquarters – USA Corporate Headquarters – Europe
950 Marina Village Parkway Rootweg 24
Alameda, CA 94501 5721 VK Asten
Phone: 510-814-7000 The Netherlands
Fax: 510-814-7026 Phone: +32.11.515600
Support@rgb.com
www.rgb.com