VSP 5360 User Manual Manual #: RGB-RD-UM-V5360 E001 Revision: V1.
VSP 5360·User Manual Thank you for choosing our products! In order to allow you to learn how to use the video processor quickly, we bring you the detailed user Manual. You can read the introduction and directions before using the video processor, please read all the information we provide carefully to use our products correctly. Copyright ©2012 All rights are reserved by RGBLINK. This document is done independently by Xiamen RGBlink Science & Technology Co.,LTD.
Guarantee and Compensation RGBlink provides a guarantee related to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transportation, as well as for material and manufacturing faults. Please complain to RGBlink by written notice.
Company Address Xiamen RGBlink Science & Technology Co., Ltd. Headquarter: S603~604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C Shenzhen office: Floor 11, A1 Building, Baiwang R&D Building, Shahe West Road, Xili Town, Nanshan District, Shenzhen, Guangdong Province, P.R.C Beijing office: Room 602, Building 7, CaiManJie, No.67 Chaoyang Road, Chaoyang District, Beijing, P.R.C Shanghai office: Building 3, 1358 Nong, Tongpu Road, Shanghai, P.R.
Operators Safety Summary The general safety information in this summary is for operating personnel. Do Not Remove Covers or Panels There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed.
Terms in This Manual and Equipment Marking WARNING Highlight an operating procedure, practice, condition, statement, etc, which, if not strictly observed, could result in injury or death of personnel. Note Highlights an essential operating procedure, condition or statement. CAUTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Amendment Records The table below lists the changes to the Video Processor User Manual. Format Time ECO# Description Principal V1.0 2013-12-17 0000# Release Vira V1.1 2014-03-07 0000# VSP 5360 1. Update the front panel; 2. Update the menu.
CONTENT CONTENT .......................................................................................... 8 1. Brief Introduction....................................................................... 13 Chapter Structure ............................................................................. 14 How to Use the Manual ................................................................... 15 Term and Definitions ........................................................................ 16 System Overview ..
26：SDI Loop Out.................................................................................... 27 27. 28. 29：Program Output .................................................................. 27 30：Preview Output ................................................................................ 27 OUTPUT .................................................................................................... 27 5.6.10.11: 10/100M Interface RJ45 ....................................................... 27 7.
Signal Keys ............................................................................................... 31 Function Keys ........................................................................................... 32 3. Hardware Installation ................................................................ 35 In This Chapter ................................................................................. 35 Safety Precautions ...........................................................................
How to Realize Single Image Switching ........................................ 51 How to Add or Clear the Layer........................................................ 52 How to Scale the Image .................................................................. 53 How to Zoom the Image .................................................................. 54 How to Set up the Position of the Image ....................................... 55 How to Crop the Image ...................................................
Resolution is Insufficient ......................................................................... 65 Sending Card Can not Take Lower Part............................................... 65 All Key Lights Light on Simultaneously .......................................... 65 Check If Dial Switch is Normal............................................................... 65 A. Specification .............................................................................. 66 B. Contact Information ...............
1. Brief Introduction This chapter is designed to introduce you to the VSP 5360 User Manual.
1. Brief Introduction Chapter Structure Chapter Structure The following chapters provide instructions for all aspects of VSP 5360 operations.
1. Brief Introduction How to Use this Manual How to Use the Manual Followings are important tips for streamlining your use of this User Manual in its electronic ―PDF‖ form. Navigation Use Acrobat Reader’s ―bookmarks‖ to navigate to the desired location. All chapter files have the same bookmark structure for instant navigation to any section. Please note: Extensive hyperlinks are provided within the chapters.
1. Brief Introduction Terms and Definitions Term and Definitions The following terms and definitions are used throughout this guide. “ASCII”: American Standard for Information Interchange. The standard code consisting of 7-bit coded characters (8 bits including parity check) used to exchange information between data processing systems, data communication systems, and associated equipment. The ASCII set contains control characters and graphic characters.
1. Brief Introduction Terms and Definitions Used color bars are the SMPTE standard color bars. In PAL video, the most commonly used color bars are eight full field bars. In the computer, the most commonly used color bars are two rows of reversed color bars. “Color burst”: In color TV systems, a burst of sub carrier frequency located on the back porch of the composite video signal. This serves as a color synchronizing signal to establish a frequency and phase reference for the chroma signal.
1. Brief Introduction Terms and Definitions “Gamma”: The light output of a CRT is not linear with respect to the voltage input. The difference between what you should have and what is actually output is known as gamma. “HDMI” - High – Definition Multimedia Interface: An interface used primarily in consumer electronics for the transmission of uncompressed high definition video, up to 8 channels of audio, and control signals, over a single cable.
1. Brief Introduction Terms and Definitions 50-filed (25 fps) composite color transmission system. “Operator”: Refers to the person who uses the system. “PIP”: Picture-in-Picture. A small picture within a larger picture created by scaling down one of the images to make it smaller. Each picture requires a separate video source such as a camera, VCR, or computer.
1. Brief Introduction Terms and Definitions switchers. This feature causes the switcher to wait until the vertical interval to switch. This avoids a glitch (temporary scrambling) which normally is seen when switching between sources. “SMPTE”: Society of Motion Picture and Television Engineers. A global organization, based in the United States that sets standards for base band visual communications. This includes film as well as video and television standards.
1. Brief Introduction Terms and Definitions has a pixel by line resolution of 640×480 with a color palette of 16 bits and 256,000 colors. “YCrCb”: Used to describe the color space for interlaced component video. “YPbPr”: Used to describe the color space for progressive-scan (non-interlaced) component video.
1. Brief Introduction System Overview System Overview VSP 5360 is a 4-layer, 14 inputs seamless switcher that accepts a wide variety of video signals, including RGB, computer-video, and HDTV. VSP 5360 has multiple cascade capacity for sync mapping if the display is beyond one can support. It combines truly seamless, glitch-free switching with advanced scaling technology producing high quality, high resolution video presentations.
1. Brief Introduction Application Questions Application Questions RGBlink offers solutions to demand technical problems. Any application questions, or required further information, please contact with our Customer Support Engineers. Refer to Appendix B for contact details.
2. Hardware Orientation In This Chapter This chapter provides detailed information about the VSP 5360 hardware.
2. Hardware Orientation VSP 5360 Back Panel VSP 5360 Back Panel The figure below illustrates the professional interface and control signals of VSP 5360 back panel. NO INTERFACE NO INTERFACE 1 Dial Switch 22.23.24 DVI Input 2.5.6.10.11 10/100M Interface RJ45 25 SDI Input 3 USB Interface 26 SDI Loop Out 4 RS232 Interface 27.28.29 Program Output 7.12 Power supply port of 30 Preview Output 31 Switch 32 Power IEC-3 port Sending Card 8.13 USB Control Port of Sending Card 9.
2. Hardware Orientation VSP 5360 Back Panel 2. 10/100M UDP Interface Used to connect the computer for control or device upgrade. 3. USB Interface Remote communication device controls interface, and is used to connect the computer. 4. RS232 Interface Used to connect the computer for control or device upgrade. INPUT Interface It includes 3 CVBS (BNC port), 2 VGA (DB15port), 3 DVI-I(compatible with the HDMI input), 2 Displayport and 1 3G SDI input. 15.16.17：CVBS Input CVBS input.
2. Hardware Orientation VSP 5360 Back Panel 25：3G SDI Input Can receive video signal from HD player, and HD camera, connect interface 16 via 75 ohms BNC port. Connect LED screens via network cable. 26：SDI Loop Out DVI loop out, can connect the next level VSP 5360 or the device with DVI loop out. Note Interface 25 and 26 is SDI input and SDI loop out, S optional module. 27. 28. 29：Program Output Program output interface can connect with next displayer or send signal to LED through sending card.
2. Hardware Orientation VSP 5360 Back Panel Switch and Power 31.32：Power Interface and Switch AC 85-264V 3.8A 50/60Hz IEC-3 Power Interface. 33: S. V. D. U Optional Module Compatible with SDI, VGA, DVI or USB optional module. SDI optional module includes 2 3G SDI input and 2 SDI loop out. VGA optional module includes 2 VGA input (DB15port), DVI optional module includes 2 DVI-I (compatible with HDMI) input, and USB optional includes 2 USB input.
2. Hardware Orientation VSP 5360 Back Panel USB Input (U Optional Module) USB input interface: Can access the USB device or mobile hard disk with USB storage function. Support image formats: JPGE, BMP, PNG. Support video formats: MP4, MPEG1, MPEG2, RMVB, MJPG. 34: Genlock Optional Module Including 1 Genlock input and 4 DVI-I(compatible with HDMI) Output. Genlock Input (G Optional Module) Genlock Input: Can receive video signal from HD player, and HD camera, connect interface 16 via 75 ohms BNC port.
2. Hardware Orientation VSP 5360 Front Panel VSP 5360 Front Panel Insert power cord and push power to ON position. LCD module on the front panel will show RGBlink and go into self verification before it load last setting and send processed image to the target monitor. For the first setup, CV1 input is default source. With front panel keyboard, user can operate VSP 5360 through the menus on LCD panel. 亮彩系列 AVDSP SERIES VSP 5360 Wait Init Device...
2. Hardware Orientation VSP 5360 Front Panel VSP 5360 front panel is as following: LCD Panel Used to show button menu and menus for interactive communication. Menu Buttons Used to adjust LCD menu and information interaction and with the same function with Enter to confirm current options. Used to adjust volume. Signal Keys CV1 input selection Button, its LED light turns on, output will be switched to this channel.
2. Hardware Orientation VSP 5360 Front Panel VGA2 input selection Button, its LED light turns on, output will be switched to this channel. DVI1 input selection Button, its LED light turns on, output will be switched to this channel. DVI2 input selection Button, its LED light turns on, output will be switched to this channel. DVI3 input selection Button, its LED light turns on, output will be switched to this channel.
2. Hardware Orientation VSP 5360 Front Panel Scale and Position function reuse button. Push the button to enter to Scale mode. Push the button again to enter to Position mode. Push MENU to exit. Crop and Zoom function reuse button. Push the button to enter to Crop mode. Push the button again to enter to Zoom mode. Push MENU to exit. Bright and Color function multiplexing button. Push the button to enter to Bright mode. Push the button again to enter to Color mode. Push MENU to exit. A: Layer A.
2. Hardware Orientation VSP 5360 Front Panel DSK function keys, it is only support DVI3 input at present. Seamless Cut Switching Button. Push the button to cut the Preview to Program. Seamless Fade In Fade Out Switching Button. Push the button to fade in fade Out the Preview to the Program. MENU Menu and Exit function keys. Push the button, and enter to the system menu or return to the last level menu. Rotate the knob to choose menu and push it to confirm and setup.
3. Hardware Installation In This Chapter This chapter provides comprehensive installation instruction for VSP 5360 hardware. Following is the size of VSP 5360 for your reference.
Safety Precautions For all VSP 5360 processor installation procedures, please observe the following important safety and handling rules to avoid damage to yourself and the equipment. To protect users from electric shock, ensure that the chassis connects to earth via the ground wire provided in the AC power Cord. The AC Socket-outlet should be installed near the equipment and be easily accessible. Unpacking and Inspection Before opening VSP 5360 process shipping box, inspect it for damage.
4. Menu Orientation In This Chapter This chapter describes all VSP 5360 processor menus, including how they are accessed, the functions that are available, and descriptions of each menu tree (in block diagram format).
4. Menu Orientation MENU MENU Push MENU button to enter the menu item, shown as below. Push the knob to select the menu item. ―>‖ before the menu means it is in selected state. Push the knob to enter corresponding setting or view the menu.
4.
4. Menu Orientation MENU OUTPUT FORMAT Push [MENU] button, OLED shows the menu, rotate the knob and select
4. Menu Orientation MENU initialized operation to recover factory setting. For more details, please refer to: How to Set up the Screen Parameter. SPLIT Push [MENU] button, OLED shows the menu, rotate the knob and select , push the knob to confirm, there are 5 kinds of split modes, shown as follows: HORIZONTAL 1/2: User can set H total, V total, first width, H pos and V pos. VERTICAL 1/2: User can set H total, V total, first height, H pos and V pos.
4. Menu Orientation MENU SHARPNESS: It can change the image color SHARPNESS via SHARPNESS Settings. COLOR RED: It can change the image color Red via Red Settings. COLOR GREEN: It can change the image color Green via Green Settings. COLOR BLUE: It can change the image color Blue via Blue Settings. Note Non-professionals are not suggesting above operations. RESET: If quality image distorts by mistake in improper operation, it can be initialized operation to recover factory setting.
4. Menu Orientation MENU RESET: If quality image distorts by mistake in improper operation, it can be initialized operation to recover factory setting. For more details, please refer to: How to Scale the Image. Note The Scale/Position button can also fulfill this setting. VGA ADJUST: Adjust the H POS, V POS, CLOCK, PHASE when input VGA signal. It also can use the AUTO ADJUST to adjust. ADC ADJUST：Auto adjust the ADC.
4. Menu Orientation MENU EXTERNAL audio. DVI3: Can choose DVI3 audio as INTERNAL embedded audio or EXTERNAL audio. DP1: Can choose DP1 audio as INTERNAL embedded audio or EXTERNAL audio. DP2: Can choose DP2 audio as INTERNAL embedded audio or EXTERNAL audio. SDI1: Can choose SDI1 audio as INTERNAL embedded audio or EXTERNAL audio.
4. Menu Orientation MENU DVI MODE: Can select HDMI agreement or DVI; by default is DVI output, When need HDMI signal output, choose HDMI. DATE RANGE: DVI1 out range adjustment can choose RGB or YCBCR; among them the RGB adjusting range is between 0-255, YCBCR adjusting range from 16 to 235. DE ADJUST: DE adjust, the sub-menu as following: DE ON/OFF: Can choose to open or close, when choose open, it can be adjusted to DE, as follows: H SIZE: Width setting. V SIZE: Height setting.
4. Menu Orientation MENU GrnOnWh2: Green On White 2. RedOnBk1: Red On Black 1. RedOnBk2: Red On Black 2. RedOnWh1: Red On White 1. RedOnWh2: Red On White 2. ALPHA: It can set the image transparency, regulating range between 0 128. SET VALUE: INSIDE: In image 2, if the pixel value is higher than the setting value, then the image is the graphic content pixel, otherwise, it is the graphic background pixel.
4. Menu Orientation MENU CLEAR: Clear one save mode. CLEAR ALL: Clear all save modes. DELAY RECALL: User can set the delay recall time, range from 0-255S. SYSTEM INFO: System information, including CONT VER, FIRMWARE, SN and IP address. TECH SUPPORT: Including: SALES HOTLINE. AFTER-SALE SERVICE. TEL: Phone of technology support. WEB SITE: Company web site of technology support. EMAIL: Email of technology support. DATE&TIME: Display date or time. DATE: Display date. TIME: Display time.
4. Menu Orientation MENU FACTORY RESET Enter FACTORY RESET to reset the IP, push the knob to confirm, and VSP 5360 is reset to its factory settings. After 5 seconds, it completes factory settings and is ready for more operations.
5. System Setup and Operations In This Chapter This chapter provides comprehensive instructions for system setup and operations.
5. System Setup and Operations Interface and Input Signal Option Interface and Input Signal Option The figure below illustrates the professional interface and control signals of VSP 5360 back panel. NO INTERFACE NO INTERFACE 1 Dial Switch 22.23.24 DVI Input 2.5.6.10.11 10/100M Interface RJ45 25 SDI Input 3 USB Interface 26 SDI Loop Out 4 RS232 Interface 27.28.29 Program Output 7.12 Power supply port of 30 Preview Output 31 Switch 32 Power IEC-3 port Sending Card 8.
5. System Setup and Operation How to Realize Single Image Switching How to Realize Single Image Switching Boot the system default CV1 to the current input source (key flashes), if need seamless switching other source such as DVI1, direct push DVI1 key, OLED screen display as follows: INPUT PROGRAM: DVI1 Choose DVI1 buttons, CV1button is off, and DVI1 key lights, single image switching (that is switch CV1 to DVI1) is finished.
5. System Setup and Operation How to Add or Clear the Layer How to Add or Clear the Layer In EFFECTS area, add the layer according to actual need, that is push any key of layer A, B, C, D (or select all the 4 keys), key lights and flashes means the layer is selected, and add layer finished.
5. System Setup and Operation How to scale the Image How to Scale the Image Push [Scale/Position] button, and enter the SCALE menu, button 0-9 lights are on, user can input the number or rotate the knob to set the vertical size and horizontal size. SCALE menu are as follows: H SIZE: Width setting. V SIZE: Height setting. RESET: If quality image distorts by mistake in improper operation, it can be initialized operation to recover factory setting.
5. System Setup and Operation How to Zoom the Image How to Zoom the Image Image vertical and horizontal zoom, the effect can stretch the image according to one direction. Push [MENU] button, and enter the menu item, rotate the knob and choose [INPUT SETUP], push the knob to confirm and choose , push the knob to confirm, settings are as follows: —>V UP 0 V DOWM V UP/DOWN H LEFT H RIGHT H LEFT/RIGHT CENTER RESET 0 0 0 0 0 0 V UP: Enlarge the image from the bottom.
5. System Setup and Operation How to Set up the Position of the Image How to Set up the Position of the Image 1. Push [Scale/Position] button two times, the button lights, user can set up the position of the image. —>H POS 0 V POS RESET 0 2. Rotate the knob, and adjust the vertical and horizontal position. 3. If quality image distorts by mistake in improper operation, it can be initialized operation to recover factory setting. 4.
5. System Setup and Operation How to Crop the Image How to Crop the Image 1. Push [Crop/Zoom] button, the button lights, user can crop the image. —>H LEFT CROP V UP CROP H RIGHT CROP V DOWN CROP RESET 0 0 1024 768 2. Rotate the knob to crop H LEFT, V UP, H RIGHT, V DOWN of the image according to actual need. 3. If quality image distorts by mistake in improper operation, it can be initialized operation to recover factory setting. 4.
5. System Setup and Operation How to Realize the LOGO Capture How to Realize the LOGO Capture 1. Push [MENU] button and enter the menu item, rotate the knob, and Select [LOGO CAPTURE] option, OLED shows as follows: —>SELECT INPUT FREEZE IMAGE H POS V POS H SIZE V SIZE SAVE TO START CAPTURE LOGO LOGO OFF 0 0 1024 768 LOGO 1 2. Choose the input source. 3. Freeze image, when capture LOGO, the program image should be frozen. 4.
5. System Setup and Operation How to Use Black How to Use Black BLACK description: BLACK signal realizes one-key-touch to a black screen. VSP 5360 BLACK provides effect processing on Program output and Preview output, BLACK uses fade in fade out effect. Operations are as follows: 1. Choose output signal. 2. Push BLACK button, the button lights. 3.
5. System Setup and Operation How to Set up the Screen Parameter How to Set up the Screen Parameter Push MENU button, rotate the knob and choose [OUTPUT FORMAT] option. The setting of screen is according to the LED size, and is applied to single image. For example, the LED size is1408 x 832. First, choose the resolution that most close to 1408 x 832 or larger than 1408 x 832, which ensures that all image can displayed on the LED screen.
5. System Setup and Operation How to Realize DSK Setting How to Realize DSK Setting Before DSK setting, please check the DSK input, currently, DSK input only support DVI3 input, settings are as follows: 1. Push [DVI3] button, and make sure there is input signal, and OLED shows DVI3 signal. 2. Set the size and position of [DVI3]. Push [DVI3] button in Preview area, the button light is on, and the image can be edited, push [SCALE] button to set the size. 1024 768 —>H SIZE V SIZE RESET 3.
5. System Setup and Operation How to Save the Parameter How to Save the Parameter Save user mode to the customer for different scene directly call, leave out the edit operation inconvenience, VSP 5360 provides 13 save preferences. Push [SAVE] button, the keys light, OLED shows related save information, operate according to the prompt information. PUSH THE LEDS ARE ON TO SAVED Button is on can be saved Button flashes will be overwrite Some of the buttons 0-12 in PRE area are on, and some flash.
5. System Setup and Operation How to Load the Saved Parameter How to Load the Saved Parameter Save user mode to the customer for different scene directly call, leave out the edit operation inconvenience, VSP 5360 provides 13 save preferences. Push LOAD button, the key lights, OLED shows related load information, operate according to the prompt information. Some of the number buttons 0-12 in PRE area are on, some flash and some are off. The buttons on mean there are save information.
6. Common Questions and Solutions In This Chapter This chapter provides the common questions and solution for the video processor.
No Output in LED Display Confirm If There is Any Input Signal Check whether the input signal is normal, if normal, check the front-end signal lines, and please note to do dual display or extended in computer . User can enter other format signals to view in the same operation. Confirm If Signal Output Find a belt VGA input (best for DVI) display, connect to the corresponding output port of processor, and check whether the signal is correct on the monitor.
LED Display Only Displays Part of the Image Signal Needs to Scale Push [Scale/Position] button in the processor and knob to adjust the actual screen size of the screen, including ―H Size‖, ―V Size‖ and ―Reset‖. Push the knob to confirm. No Display in the Second Half Part of LED Display Resolution is Insufficient Please make sure the points of the screen width and height, choose the resolution to be bigger than screen width via push [MENU] button to find [OUTPUT FORMAT], and push the knob to confirm.
A. Specification BNC Input Number of Inputs 3 Supported Standards PAL/NTSC Signal Level 1Vpp±3db (0.7V Video+0.3v Sync ) 75 ohm Multiplex 480i,576i VGA DB15 Input Number of Inputs 2 Connector Standard DB15 Socket Supported Standard VGA-UXGA Signal Level R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.
Number of Inputs 1 Connector BNC Signal Level 800mV±10% Supported SMPTE：625/25 PAL， 525/29.97 NTSC，625/50p PAL，525/59.94p Standard NTSC, 720p50，720p59.94/60，1080i50，1080i59.94/60，1080p50， 1080p59.94/60 Belden 1694A 100m self-adaptive 3G,200m self-adaptive 1.485G,350m Balance self-adaptive 270Mbps Program DVI Output Number of Outputs 2 Connector Standard DVI-I Socket Signal Level TMDS pw, 165MHz bandwidth Supported SMPTE：625/25/50 PAL, 525/29.97/59.94 NTSC, Resolution 1080P50,1080P59.
Number of Outputs 1 Connector Standard DB15 Socket Supported VESA: Resolution 1024×768×60, 1280×720×60, 1280×768×60, 1280×800×60, 1280×1024×60, 1360×768×60, 1366×768×60, 1400×1050×60, 1440×900×60, 1600×1200×60, 1680×1050×60, 1920×1080×60, 1920×1200×60, 2048×1152×60, 2560×816×60, 720×480×60i, 720×576×50i, 800×600×60, 1024×768×75, 1024×768×85, 1280×720×23.98, 1280×720×24, 1280×720×25, 1280×720×29.97, 1280×720×30, 1280×720×50, 1280×720×59.94, 1920×1080×50i, 1920×1080×59.
Belden 1694A 100m self-adaptive 3G,200m self-adaptive 1.485G,350m Balance self-adaptive 270Mbps SDI Loop Out Number of Inputs 2 Connector BNC Signal Level 800mV±10% Supported SMPTE：625/25 PAL， 525/29.97 NTSC，625/50p PAL，525/59.94p Standard NTSC, 720p50，720p59.94/60，1080i50，1080i59.94/60，1080p50， 1080p59.94/60 Belden 1694A 100m self-adaptive 3G,200m self-adaptive 1.
B. Contact Information Warranty: All video products are designed and tested to the highest quality standard and backed by a full 3-year parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages.
C. Software Upgrade IP Software Download Instruction Turn off the power, take the two coding switch to ―ON‖ state as below: Connect one side of the RJ11 download line to the RS232 on the video processor, and the other side being connected to the serial port on the PC.
After download, exit the program, turn off the power, tack the two coding switch back, as below restart the equipment power, check if the equipment work normally. Note Flash Magic download website: http://www.flashmagictool.com/download.html&d =FlashMagic.
