User manual

5. System Setup and Operation
How to Set up the Screen Parameter
VSP 5360 User Manual 59
How to Set up the Screen Parameter
Push MENU button, rotate the knob and choose [OUTPUT FORMAT]
option.
The setting of screen is according to the LED size, and is applied to single
image. For example, the LED size is1408 x 832.
First, choose the resolution that most close to 1408 x 832 or larger than
1408 x 832, which ensures that all image can displayed on the LED screen.
Push [MENU] button, OLED show the menu, rotate the knob and choose
[SCREEN PARAMETERS], push the knob to confirm, settings are as
follows:
SCREEN H SIZE: Input number 1408.
SCREEN V SIZE: Input number 832.
SCREEN H POS: Initial parameters is 0, need not set if image is not
migration.
SCREEN V POS: Initial parameters is 0, need not set if image is not
migration.
MODE: User can choose full size or screen size.
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.