User manual

5. System Setup and Operation
How to Realize DSK Setting
VSP 5360 User Manual 60
How to Realize DSK Setting
Before DSK setting, please check the DSK input, currently, DSK input only
support DVI3 input, settings are as follows:
1. Push [DVI3] button, and make sure there is input signal, and OLED
shows DVI3 signal.
2. Set the size and position of [DVI3]. Push [DVI3] button in Preview
area, the button light is on, and the image can be edited, push
[SCALE] button to set the size.
3. Choose the input signal in Preview area.
4. Push [DSK] button, and start the DSK function.
Rotate the knob and choose <PRESET>, press the knob to confirm,
choose the preset mode of DVI3, for example, WhOnBk2, press the
knob to confirm.
5. Push [SAVE] button, and save the above settings.
—>H SIZE 1024
V SIZE 768
RESET
—>DSK ON
PRESET USER
ALPHA 0
DSK 0
—>PRESET WhOnBk2
ALPHA 0