User manual

VSP 5360 User Manual 66
A. Specification
BNC Input
Number of Inputs
3
Supported Standards
PAL/NTSC
Signal Level
1Vpp±3db (0.7V Video+0.3v Sync ) 75 ohm
Multiplex
480i,576i
VGA DB15 Input
Number of Inputs
2
Connector
Standard DB15 Socket
Supported Standard
VGA-UXGA
Signal Level
R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v
Sync ) 75 ohm
black level: 300mV Sync-tip: 0V
Supported Resolution
VGA-UXGA (800*600@60, 1024*768@60, 1280*1024@60,
1440*900@60,1600*1200@60)
DVI Input
Number of Outputs
3
Connector
Standard DVI-I socket
Supported Resolution
SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC,
1080P50,1080P59.94/60,1080i50,1080i59.94/60,
720p50,720p59.94/60
VESA: 800×600×60Hz，1024×768×60Hz，1280×768×60Hz，
1280×1024×60Hz，1600×1200×60Hz，1920×1080×60Hz
Signal Level
TMDS pwl, single pixel input,165MHz bandwidth
Format Standard
HDMI 1.3
DP (Displayport) Input
Number of Inputs
2
Connector
Standard
Supported Resolution
Support resolution: WQXGA + (1920 x 1200), and color
depth: 30/36 bit (each primary 10/12 bit)
Supported Bandwidth
10.8Gb/s
Format Standard
DP1.1
SDI Input
Number of Inputs
1
Connector
BNC
Supported Standard
ITU-R BT.656,ITU-R BT.601,SMPTE 259M, SMPTE 292,
SMPTE 297
Balance
Belden 1694A 100m self-adaptive 3G,200m self-adaptive
1.485G,350m self-adaptive 270Mbps
SDI Loop Out