Operating instructions

Users Manual

CONNECT

CobraNet Receivers

Turns “Wink” Light ON & OFF Status Indicator

Name

CobraNet Transmitters

Turns Mute ON & OFF

Continue until all networked loudspeakers are

linked to icons in the main workspace. When an

icon is linked to a networked loudspeaker, the

status indicator under its name changes from

Unassigned (Red) to OK (Green). Notice that

the directory listing for that loudspeaker also

moves from the Network folder to the Speaker

folder.

To conrm that the setup is complete, return

to System Layout and place the cursor over

the loudspeaker listings in the directory tree.

As you can see from the pop up

screens, RHAON has assigned

IP numbers to each of the loud-

speakers.

Note that you could also open the

Network Manager and view this same informa-

tion in list form. To open the Network Manager,

go to the File pull down menu and select Network Manager.

Let’s take a closer look at the Connect Mode loudspeaker icon.

Clockwise from the top, the rst item is the icon’s name. The loudspeaker symbol on the right of the Status Bar is a Mute control: click on it

to mute or un-mute the loudspeaker. The green triangles on the far right represent CobraNet Transmitters (Tx). Each CobraNet Transmitter

can transmit one channel of information from the DSP out to the CobraNet network. The green Status bar reading OK at the bottom of the

icon indicates this icon has been linked to a networked loudspeaker and is operating satisfactorily. A red bar would indicate a problem and

the text would identify the problem, such as unassigned.

To its left of the status bar is a “W” button. Click on it to Wink the light on the front of the networked loudspeaker that is linked to the icon.

This makes it easy to identify the loudspeaker and conrm its location. On the outside left edge of the icon are two red triangles represent-

ing CobraNet Receivers (Rx): each can receive one signal out of a bundle of up to 8 audio channels from the network.

Double clicking on any loudspeaker’s Connect icon opens the Connect Properties screen associated with the linked loudspeaker. More

details on Properties screens are on the next page.