Operating instructions
CONTROL MODE
Control Mode provides access to the Loudspeaker
Amplier’s internal DSP and allows you to control its
settings. You can enter Control Mode by clicking on the
Control button at the top of the main workspace, or from
within any loudspeaker’s Properties window. Any or all
of the Control functions can be restricted to authorized
operators who have password access; more information
on password authorization can be found in the Supervise
Mode section of this manual.
When you enter Control mode in the main workspace, the
directory tree on the left remains the same.
However, notice that the icons themselves have changed.
The CobraNet Rx and Tx arrows are gone. On the left
side Wink and Power buttons have been added. On the
right side, a Mute button is labeled with a driver symbol.
Below it is a Signal Present indicator.
Double-click an array icon to open its Properties window in Control mode. Notice that the left hand section of the Control Mode Properties
window is the same as in Connect mode.
Turns “Wink” Light ON & OFF
Status Indicator
Name
Mute Button
Signal Present indicator
Toggles Power from On
to Standby
36
CONTROL
IC
2
Users Manual