Instructions / Assembly
14
This water heater may be equipped with status lights located on the top cavity cover. The purpose of these
lights are to indicate the power and element status of the water heater.
Possible light combinations and methods to determine proper function of water heater are shown below.
1)
Power on and heating cycle complete.
1) Power on and bottom element presently heating water.
1) Power on and top element presently heating water.
2) Reduced amount of available hot water with this status. The bottom element may have
failed. Call for service.
3) Cold water with this condition means top element may have failed. Call for service.
1) Power off. Check power source or connections.
2) Emergency Cut Off (ECO) has activated. Turn off power supply and have a qualiî‚żed
technician reset the ECO.
3) Call for service.
Power
Upper
Element
Lower
Element
Status Lights and Diagnostics (if installed)