Specification

Energy Factor based on D.O.E. (Department of Energy) test procedures.
Estimated Sound First Hr. Recovery Ht. to Ht. to Approx.
Gallon Model Energy Yearly Compressor Level Rating in G.P.H. Height Diam. Cold Inlet & Hot Outlet Unit Ship Wt.
Fuel Type Description Capacity Number Factor Energy Cost Btu/H (dBa) G.P.H. 90° F Rise A B Drain Valve & T&P Wt. (lbs.) (lbs.)
Electric Tall 50 XE50T10HD50U0
3.50 EF $151 4200 49 70 29 61" 22-1/4" 3-5/8" 39-5/8" 178 218
Electric Tall 65 XE65T10HD50U0 3.50 EF $151 4200 49 78 29 64" 24-1/4" 3-7/8" 42-3/8" 225 262
Electric Tall 80 XE80T10HD50U0 3.50 EF $151 4200 49 90 29 74" 24-1/4" 3-7/8" 52-3/8" 244 281
Hybrid Specifications
10/16 FORM NO. THD-PPEH4
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
Description Dimensiuons (Shown in Inches)
Gal. Model
Cap. Number
A B C D E F G H J
50 XE50T10HD45U0 61 22-1/4 28 24 36 50 27 77 73
65 XE65T10HD45U0 64 24-1/4 30 26 38 52 29 80 76
80 XE80T10HD45U0 74 24-1/4 30 26 38 52 29 90 86
Air
Intake
Cold
Air
Exhaust
Condensate
Overflow
(Ducting Attached)
Condensate
Drain
Pressure
Relief
Valve
Hot Water
Outlet
Water
Inlet
2" Clearance
Needed for T&P
Release
6" Clearance for Air
Filter Maintenance
12" Minimum Length
Insulated Flex Duct Required
for Vibration Isolation
2"
12"
12"
(Door with Louvers)