Specification

03/15 FORM NO. THD-PGMHDV N
See specifications chart on back.
PERFORMANCE
™
Direct Vent gas water heaters
are certified for Manufactured Housing (HUD)
and modular construction
PERFORMANCE
Direct Vent for
Manufactured Housing
30 and 40-Gallon Capacities
Up to 30,000 Btu/h
Natural Gas
Efficiency
 .62 - .63 EF
Performance
 FHR: 60 gallons for 40-gallon model
and 48 gallons for 30-gallon model
 Recovery: 30.3 GPH a 90° F rise
Self-Cleaning
 Fights sediment and
mineral build-up
 Reduces fuel costs
Flexibility
 Field convertible controls for natural
gas or LP operation included
 No external door is required
 Hot water outlet located at top
 Cold water inlet at side for fast,
economical hook-up
Longer Life
 Premium grade anode rod provides
long-lasting tank protection
Plus…
 Piezo ignition – easy light pilot
 Factory installed temperature and
pressure relief valve – side location
 Low lead compliant
Warranty
 6-Year limited warranty for tank
and parts, 1-year full in-home labor
warranty*
*See written warranty for complete details
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efficiency requirements
of NAECA, ASHRAE standard 90, ICC Code and all
state energy efficiency performance criteria.
Roof Jacks
12" Non-Adjustable & Air Inlet AP12032E
15-32" Adjustable & Air Inlet AP12032B
30-60" Adjustable & Air Inlet AP12032C
48-95" Adjustable & Air Inlet AP12032D
Air Inlets
6" Non-Adjustable AP12019B
11-22" Adustable AP12017B
Extension Pipe Kit
Roof Jack Extension Pipe Kit AP12021
Roof jack and air inlet must be ordered separately
with 30, 40 and 50-gallon direct vent models and
must be in accordance with instructions furnished
with the heater. No other roof jack or air inlet
assemblies are approved for installation with this
heater. Clamps and secure strapping are packed
in water heater carton.
Adjustable Roof
Jack Vent
Design allows adjustment
to roof pitches of up to
5/12". Four roof
jacks available to
accommodate roof
thickness of 12" up to 95".
Direct Combustion
Air Inlet
Air is drawn directly into
combustion chamber
through air inlet fixed
to base; 1/2" screen for
rodent protection.