Use and Care Manual

4. TAMPER RESISTANT SCREWS (USED TO
SECURE BURNER ACCESS DOOR) REMOVAL:
Using a #20 Torx head tool, remove the four tamper
resistant screws at the corners of the burner access door
assembly and discard them.
5. BURNER ACCESS DOOR ASSEMBLY REMOVAL:
Grasp the burner supply tube and carefully remove the
burner access door assembly with burner assembly from
the water heater.
6. PILOT ASSEMBLY REMOVAL: Determine which
burner assembly configuration your water heater has and
use the appropriate, subsequent removal instructions:
Configuration 1
Main burner with built in burner bracket. (Pilot
assembly mounted to the burner supply tube)
Using a Phillip’s Head Screwdriver, remove the screw
which attaches the pilot assembly to the burner supply
tube and discard it. Pull the orange grommet with the pilot
assembly out of the mounting hole, which is located on the
burner access door. See Figure 3.
Configuration #2
Main burner without pilot adapter bracket.
(Pilot assembly mounted to the burner supply
tube)
Using a Phillip’s Head Screwdriver, remove the screw
which attaches the pilot assembly to the burner supply
tube and discard it. Pull the orange grommet with the pilot
assembly out of the mounting hole, which is located on the
burner access door. See Figure 4.
Configuration #3
Main burner with built in burner bracket.
(Pilot assembly mounted to the burner bracket)
Using a Phillip’s Head Screwdriver, remove the screw
which attaches the pilot assembly to the burner bracket and
discard it. Pull the orange grommet with the pilot assembly
out of the mounting hole, which is located on the burner
access door. See Figure 5.
Configuration 4
Main burner with pilot adapter bracket.
(Pilot assembly mounted to the pilot adapter bracket)
Using a Phillip’s Head Screwdriver, remove the screw which
attaches the pilot assembly to the pilot adapter bracket and discard
it. Pull the orange grommet with the pilot assembly out of the
mounting hole, which is located on the burner access door. See
Figure 6.
2
Figure 3
Pilot Assembly
Burner
Supply Tube
Pilot Assembly
Mounting Screw
Figure 4
Figure 5
Figure 6
Burner Supply Tube
Pilot
Assembly
-P-
Burner Supply Tube
Pilot
Assembly
Burner Supply Tube
Pilot
Assembly
Burner Bracket
Pilot Assembly
Mounting Screw
Burner Bracket
Pilot Assembly
Mounting Screw
Pilot Adapter Bracket
Pilot Assembly
Mounting Screw