Use and Care Manual

4
14. TEMPERATURE SETTING:
!
DANGER: Hotter water increases the potential
for Hot Water SCALDS.
Turn the temperature dial to the desired setting.
The recommended starting point temperature is
120°F (49°C).
The illustrations in Figures 9 and 10 details the
approximate water temperature for each mark on
the gas control.
15. REPLACE JACKET DOOR: Replace the jacket door
by inserting one end of the door behind the jacket edge
then insert the opposite end of the door behind the
jacket edge and release the door.
TO LIGHT PILOT:
PRESS / HOLD KNOB IN PILOT POSITION
PRESS IGNITER BUTTON UNTIL PILOT LIGHTS
RELEASE KNOB WHEN STATUS LIGHT BLINKS
OFF
PILOT
VAC
WARM
HOT
A
B
C
VERY
HOT
SCALDING RISK INCREASES
WITH HOT WATER
STATUS
PILOT
IGNITER
70° F
105° F
120° F
130° F
140° F
150° F
160° F
Temperatures are approximate.
120°F
125°F
150°F
140°F
130°F
90°F.
155°F
Figure 9
Figure 10
Honeywell Combination Gas Control
White-Rodgers Combination Gas Control