Specification Sheet

Air
Model I.D./Accessories/Compressor
RPRL Series
4
Model Number Identification
Accessories
• Outdoor Thermostats—
RXPT-A01—One outdoor thermostat in box.
RXPT-A02—One outdoor thermostat for mounting in box for
use with RXPT-A01 or A03.
RXPT-A03—One outdoor thermostat with emergency Heat
Relay wired and mounted in box.
RXPT-A04—Two outdoor thermostats with emergency Heat
Relay wired and mounted in box.
• Blower Time Delay Control—RXMD-C06.
• Fossil Fuel Kits—Not required. See Rheem Thermostats
Specification Sheet (T11-001).
• Low Ambient Control—Cycles outdoor fan to maintain ade-
quate condensing pressures assuring liquid refrigerant flow to
the coil. Allows low temperature operation in the cooling cycle
down to 0°F [-17.8°C] outdoor temperature. It is recom -
mended that this control be installed in units to be operated
at outdoor ambient temperatures under 70°F [21°C] (Model
No. RXAD-A08)
[ ] Designates Metric Conversions
• Dual Fuel High Pressure Control—RXME-A01.
This kit is required if this heat pump is installed in a dual fuel
application.
• Communicating 2 Wire Kit —RXME-A02.
This kit will allow the outdoor unit to communicate to the
system with only 2 wires.
* Photos are representative. Actual models may vary.
For detailed thermostat match-up information,
see specification sheet form number T11-001.
300-Series *
Deluxe
Programmable
400-Series *
Special Applications/
Programmable
500-Series *
Communicating/
Programmable
200-Series *
Programmable
Thermostats
R P R L 024 J EC
RHEEM REMOTE
HEAT PUMP
EFFICIENCY
16 SEER
DESIGN
SERIES
R-410A
ELECTRICAL
DESIGNATION
J = 208/230V-1-6
Ø
VARIATIONS
EC = EQUIPPED WITH THE
COMFORT
CONTROL
2
SYSTEM
™
COOLING
CAPACITY
025 = 24,000 BTU/HR [7.03 kW]
037 = 36,000 BTU/HR [10.55 kW]
049 = 48,000 BTU/HR [14.07 kW]
061 = 60,000 BTU/HR [17.58 kW]
—