Product Sheet

1. Guide only, subject to ambient water temperature and pressure, correct pipe sizing and appliance flow rates.
2. 50ºC factory pre-set models supply hot water at a maximum 50ºC at all outlets in accordance with AS 3498.
Some applications may require tempering, refer to AS/NZS 3500:4. 60ºC and higher temperature models must
have a tempering valve installed in accordance with AS/NZS 3500:4.
3. Warranty Conditions: 10 Years parts and 3 Years labour on Heat Exchanger, 3 Years parts & labour on other components,
when installed in a domestic dwelling. For all other installations, the warranty period is 1 Year parts and
labour on Heat Exchanger and other components.
4. Any financial savings will vary depending upon type of Rheem solar system installed, orientation and inclination of the
solar collectors, type of water heater being replaced, hot water consumption and fuel tariff. Maximum financial savings
off your hot water bill are achievable when replacing an electric water heater on continuous tariff.
5. Applies to 70ºC capable models when set to 70ºC.
® Registered Trademark of Rheem Australia Pty Ltd. TM Trademark of Rheem Australia Pty Ltd.
Rheem Australia Pty Ltd, 1 Alan St, Rydalmere, NSW 2116 Australia.
Information and data correct as at 01/05/12. Materials and product data are subject to change without notice.
Date of printing June 2012.
GLOSSARY OF TERMS
Continuous Flow/Instantaneous alternative names for gas continuous flow water
heaters, typically electronically controlled and fan forced to improve performance and
temperature control.
Flow Rate – the volume of water a continuous flow water heater delivers a nominated
temperature rise above the incoming water temperature, commonly in the range of
10-27 Litres/Minute.
Propane – correct name for Liquified Petroleum Gas for domestic use, also called LPG.
Some areas are supplied with Butane instead of Propane, if unsure contact your gas supplier.
Flamesafe
®
– a unique Rheem safety protection feature that automatically shuts down
the continuous flow water heater should a fault develop.
Q Factor
TM
– a unique Rheem feature that keeps the heater in readiness so hot water
delivery is as fast as possible, and at consistent temperature.
RHEEM PRODUCT DATA
RHEEM CONTINUOUS FLOW
GAS HOT WATER
HOT WATER THAT NEVER RUNS OUT
GASREVISED MAY 2013 RATING
ENERGY
PERSONS CAPACITY
L/MIN
YEAR
WARRANTY
1012-541-6
6
You can be confident Rheem
represents the most energy efficient
hot water solutions all with a 6 Star
rating. It’s good for you and the
environment.
WITH RHEEM
YOU’RE IN CONTROL
factor
3
RHEEM AUSTRALIA Pty Ltd | www.rheem.com.au | sales 132 552 | service 131 031
INSTALL A
COMES ON STEADY, HOT AND STRONG
INSTALL AINSTALL AINSTALL A
MKT-BR-RD-CF0513
Rheem 12/16/18/20
HOT WATER
OUTLET
COLD WATER
INLET
GAS
INLET
Rheem 24
HOT WATER
OUTLET
COLD WATER
INLET
GAS
INLET
B
C
A
Rheem 12 Rheem 16 Rheem 18 Rheem 20 Rheem 24 Rheem 27 Rheem Water Star
Model Number 876612NF/PF 874612NF/PF 876E16NF/PF 874E16NF/PF 876618NF/PF 874618NF/PF 876620NF/PF 874620NF/PF 875624NF/PF 871624NF/PF 876627NF/PF 874627NF/PF W8100401
875E24NF/PF 871E24NF/PF
Maximum Temperature °C 50 60 50 60 50 60 50 60 50 60 50 60 70
Number of Bathrooms 1 1 – 1.5 1 – 1.5 1.5 – 2 2 – 2.5 2.5 – 3
Gas Type Natural Gas/Propane Natural Gas/Propane Natural Gas/Propane Natural Gas/Propane Natural Gas/Propane Natural Gas/Propane
GAS Energy Rating 6.0 Stars 6.0 Stars 6.0 Stars 6.0 Stars 6.0 Stars 6.0 Stars
Flow Rate L/Min at 25°C Rise 12L/Min 16L/Min 18L/Min 20L/Min 24L/Min 27L/Min
Minimum Operating Flow Rate 2.7L/Min 2.7L/Min 2.7L/Min 2.7L/Min 2.7L/Min 2.0L/Min
Nominal Gas Consumption 94 MJ/Hr 126 MJ/Hr 140 MJ/Hr 153 MJ/Hr 188 MJ/Hr 205 MJ/Hr
Dimensions
A - Height mm 520 520 520 520 565 600 565
B - Width mm 350 350 350 350 350 350 350
C - Depth mm 160 160 160 160 205 215 190
Depth – from wall to Hot Water Outlet 51 51 51 51 127 84 _
Depth – from wall to Cold Water Inlet 43 43 43 43 53 64 _
Depth – from wall to Gas Inlet 45 45 45 45 103 97 _
Weight (empty) 18kg 18kg 18kg 18kg 21kg 23kg 12.5Kg
Max. Water Supply Pressure 1000kPa 1000kPa 1000kPa 1000kPa 1000kPa 1000kPa 800kPa
Min. Water Supply Pressure 140kPa 140kPa 140kPa 140kPa 140kPa 140kPa
Cold Water Connection R ¾ / 20 R
¾
/ 20 R ¾ / 20 R
¾
/ 20 R ¾ / 20 R ¾ / 20 R ¾ / 20
Hot Water Connection R ¾ / 20 R
¾
/ 20 R ¾ / 20 R ¾ / 20 R ¾ / 20 R ¾ / 20 R ¾ / 20
Gas Connection R ¾ / 20 R
¾
/ 20 R ¾ / 20 R ¾ / 20 R ¾ / 20 R ¾ / 20
Temperature Controllers
Kitchen 299850 299850 299850 299850 299850 299850 –
Bathroom 1 299851 299851 299851 299851 299851 299851
Bathroom 2 299852 299852 299852 299852 299852 299852
Deluxe Temperature
Controllers
Kitchen 299858 299858 299858 299858 299858 299858 –
Bathroom 1 299859 299859 299859 299859 299859 299859
Bathroom 2 299860 299860 299860 299860 299860 299860
Accessories
Pipe Cover 299841 299841 299841 299841 299848 299830
Recess Box 299842 299842 299842 299842 299842 299831
Rheem EZ Link Kit 290141 290141 290141 290141 N/A 290141
Wall Mount Security Kit 299868 299868
Security Cage 299867 299867 299867 299867 299867 299867
Power 240V AC
Rheem 27
GAS INLETCOLD WATER
INLET
HOT WATER
OUTLET
NOW
6 STAR
EFFICIENT
105MM 208MM 210MM 210MM
297MM
PMS 485c
CYAN MAGENTA YELLOW BLACK
AKA Brand Design | Suite 301 The Cooperage | 56 Bowman Street | Pyrmont NSW 2009 | www.akabranddesign.com.au All care has been taken in the creation of this artwork but it is the responsibility of the client to check for accuracy prior to print.
Path: /Volumes/PROMISE PEGASUS/WIP/RHW/RHW029 Rheem Continuous Flow Brochure Update /FA/RHW029F01 Cont Flow Outside V17.ai
Save Date: 15 May, 2013 - 10:17 (+10 GMT) Print Date: 15 May, 2013 - 10:16 (+10 GMT) User: AKA
Drawing Number:
Printer:
Print Process:
Barcode: % (. BWR)
Telephone: 02 8065 1257
Mobile: 0411 112 705
Client Services: KH
Creative: AM
Spell Check
3D
Knife
Swatches
Production
Same Size Artwork File
Printout 100%
Dimensions:
Substrate:

Summary of content (8 pages)