Replacement Parts List
To place your order c all 1-800-621-56 22; fax 1-800-535-9538
89
SUPPLIES & HARDWARE
Touch’n Seal
®
Touch’n Seal
®
No Warp Foam 4004521212 (12 oz.) 4004521224 (24 oz.)
Touch ‘n Seal offers a low-pressure, polyurethane foam as a disposable, straw-dispensed
aerosol. No-warp fills and seals space between finished jambs, sills, headers and rough
openings while exerting up to 90% less curing pressure than conventional foam, providing
airtight insulation without warping. (Available in 12 or 24 oz)
❉ Low-pressure formula exerts up to 90% less curing pressure
❉ Stops air infiltration permanently - o
utperforms fi
berglass
❉ Creates moisture vapor barrier
❉ Bright while foam
❉ Cures fast
❉ No gun applicator needed
❉ ASTM E-84: Flame Spread 5, Smoke Developed 25
❉ Contains fire retardant
Touch’n Seal
®
Gun Foam II 4004528712 (24 oz.)
Gun Foam is a one-component, polyurethan foam sealant used to seal cracks and holes,
providing airtight insulation that blocks drafts, moisuture and insects. It’s applied with a
gun applicator and can be used under the plate line, at the juncture of the plate line and
the slab or foundation, and any penetration through the top or the bottom plate line into a
conditioned area. It fills cracks in the exterior sheeting (due to poor application or pene-
tratio
ns made for uti
lity services), at the corner and tee-joints in framing, and any other
place where air might penetrate the exterior envelope.
❉ Seal gaps and cracks, providing over 75% closed cell content
❉ Stops air infiltration permanently
❉ Outperforms fiberglass
❉ High yield (3000 plus linear feet of 1/4” diameter bead)
❉ Fast cure
❉ UL Classified: Flame Spread 15, Smoke Developed 25
❉ Contains fire retardant
❉ Meets Building Codes: CABO (Council of American Building Off
icial
s)
BOCA (Building Officials and Code Administrators, International)
CCMC (Canadian Construction Material Centre (formerly CHMC)
ICBO (International Conference of Building Officials)
SBCCI (Southern Building Code Congress International)
Technical Information
Density: (ASTM D-1622) 1.3-1/8 lbs./cu. ft. Max. Service Temp. (Cured): 2407F (1167C)
Comprehensive Strength: (ASTM D-1621) 11 psi Tensile Strength: (ASTM D-1623) 26 psi
Percent Elongation at Break: 12% Shear Strength: (ASTM C-273) 18 psi
Thermal Resistance: (ASTM C-518) Shear Strain: (ASTM C-273) 38 psi
R-Value: 4.5 /inch thick Size (Volume): 24 oz. can (1.25 cu. ft.)
Solvent Free Shelf Life: 18 months