Specification Sheet

ManualsBrandsRheem ManualsFurnaceRheem Classic Series: Up to 95% AFUE 2-Stage V.S. ECM

Rheem Classic

Series Two-Stage

Downflow/Horizontal Gas Furnaces

FORM NO. G11-524

RGTM- Series

95% A.F.U.E.

Input Rates of 60, 75, 90 & 105 kBTU

[17.58, 22, 26.38 & 30.77 kW]

With Dual Comfort Control

™

✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with

Department of Energy test procedures.

• The Rheem Classic

Series 95% A.F.U.E. with Dual Comfort

Control

™

line of downflow/horizontal gas furnaces are

designed for utility rooms, closets, alcoves, or attics.

The

RGTM is shipped in the downflow configuration and is easily

converted for horizontal left-hand airflow applications.

The

design is certified by CSA.

• Two stages of operation to save energy and maintain optimal

comfort level.

• Furnace operates at 70% capacity for low-heat and 100%

capacity for high-heat.

• Compatible with single or two-stage thermostat. (For optimal

performance a two-stage thermostat is recommended.)

• Heat exchanger is constructed of all stainless steel for maxi-

mum corrosion resistance and thermal fatigue reliability.

• Low profile “34 inch” design is lighter and easier to handle

and leaves room for optional accessories.

• Left or right side gas, electric, and condensate drainage

connections.

• Integrated control board manages all operational functions

and provides hookups for humidifier and electronic air

cleaner.

• An insulated blower compartment, a slow-opening gas valve

and a specially designed inducer system make it one of the

quietest furnaces on the market today.

• Variable speed blower motor technology provides ultimate

humidity control, quieter sound levels and year-round energy

savings.

• Optional indoor or outdoor combustion air. In addition,

combustion air may be piped to either the top or side of the

cabinet on all downflow models. A special molded fitting is

provided to ease installation.

• Solid bottom is standard.

• Control board diagnostics.

• A variety of cooling coils and plenums designed to use with

the Rheem Classic

Series 95% A.F.U.E. gas furnaces are

available as optional accessories for air conditioning models.

Air

Gas Furnaces

RGTM Series

Summary of content (12 pages)

PAGE 1
Air Gas Furnaces RGTM Series Rheem Classic® Series Two-Stage Downflow/Horizontal Gas Furnaces RGTM- Series 95% A.F.U.E. Input Rates of 60, 75, 90 & 105 kBTU [17.58, 22, 26.38 & 30.77 kW] With Dual Comfort Control™ ✝ A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with Department of Energy test procedures. • The Rheem Classic ® Series 95% A.F.U.E. with Dual Comfort Control™ line of downflow/horizontal gas furnaces are designed for utility rooms, closets, alcoves, or attics.
PAGE 2
Air Table of Contents RGTM Series TABLE OF CONTENTS Standard & Optional Equipment ..............................................................................3 Physical Data & Specifications ................................................................................4 Model Number Identification ....................................................................................5 Dimensional Data ..................................................................................................
PAGE 3
Air Standard & Optional Equipment RGTM Series FUSE PROTECTION INTEGRATED FURNACE CONTROL ECM MOTOR DRAFT INDUCER PRESSURE SWITCH GAS VALVE AND MANIFOLD PRIMARY AND SECONDARY HEAT EXCHANGER DIRECT SPARK IGNITION REMOTE SENSOR IN-SHOT BURNERS STANDARD EQUIPMENT OPTIONAL EQUIPMENT Completely assembled and wired; heat exchanger; primary: 409 stainless steel, secondary: 29-4C stainless steel; induced draft; pressure switches; redundant main gas control; blower compartment door safety switch; solid sta
PAGE 4
Air Physical Data & Specifications RGTM Series Physical Data and Specifications—Downflow/Horizontal Models U.S. and Canadian Models MODEL NUMBERS RGTM-06*MAES 60,000 [17.58] 42,000 [12.31] 56,000 [16.41] 40,800 [11.96] RGTM-07*RBGS 75,000 [21.98] 52,500 [15.39] 70,000 [20.51] 51,000 [14.95] RGTM-09*ZAJS** 90,000 [26.38] 63,000 [18.46] 84,000 [24.62] 61,200 [17.94] RGTM-10*RBJS 105,000 [30.77] 73,500 [21.54] 97,000 [28.43] 71,400 [20.93] 37,944 [11.12] 47,430 [13.90] 56,916 [16.69] 66,402 [19.
PAGE 5
Air Model Number Identification RGTM Series Model Number Identification R G Rheem Gas Furnace T M — 07E* R Downflow/ Design Blower Size Heating Input Horizontal Series M = 11 x 7 Designation Condensing [279 x 178 mm] Gas Furnace R = 11 x 10 Input Electric [279 x 254 mm] Ignition BTU/HR Z = 12 x 11** 04* 45,000 [13.19 kW] [305 x 279 mm] 06* 60,000 [17.58 kW] 07* 75,000 [22 kW] 09* 90,000 [26.38 kW] 10* 105,000 [30.77 kW] 12* 120,000 [35.
PAGE 6
Air Dimensional Data RGTM Series MODEL RGTM- A B C D E F LEFT SIDE 06 07 09 10 171/2 [445] 21 [533] 21 [533] 241/2 [621] 1611/32 [415] 1927/32 [504] 1927/32 [504] 2311/32 [593] 155/8 [397] 193/16 [486] 193/16 [486] 225/8 [575] 2 [51] 2 [51] 2 [51] 2 [51] 165/8 [422] 201/8 [511] 201/8 [511] 235/8 [600] 137/8 [352] 173/8 [441] 173/8 [441] 207/8 [530] 0 0 0 0 MINIMUM CLEARANCE (IN.
PAGE 7
Air Dimensional Data RGTM Series [ ] Designates Metric Conversions IMPORTANT NOTE: Horizontal furnace may be installed for horizontal left hand air supply ONLY. The condensate trap provided for horizontal application must be installed in the field beneath the unit as directed in the furnace Installation & Operating Instructions.
PAGE 8
Air Blower Performance Data RGTM Series MODEL RGTM- BLOWER SIZE (D x W) IN. [mm] ECM MOTOR H.P. [W] RGTM-06*M 11 x 7 [279 x 178] 1/2 [373] RGTM-07*R 11 x 10 [279 x 254] 3/4 [559] RGTM-09*Z** 12 x 11 [305 x 279] 1 [746] RGTM-10*R 11 x 10 [279 x 254] 1 [746] *E=Standard *N=NOx Models NOTE: CFM values represent furnace-only airflow ratings.
PAGE 9
Air VENT TERMINATION KITS CONCENTRIC: HORIZONTAL/ VERTICAL = RXGY-E03A (US & Canadian Installations) HORIZONTAL TWO PIPE: RXGY-D02, RXGY-D03, RXGY-D04 (US Installations) RXGY-D02A, RXGY-D03A, RXGY-D04A (Canadian Installations) RXGY-G02 (US Only) CONDENSATE PUMP KIT: RXGY-B01 NEUTRALIZER KIT: RXGY-A01 FOSSIL FUEL KIT: RXPF-F01, RXPF-F02 (TVA) Accessories RGTM Series FOR HIGH ALTITUDES: HIGH ALTITUDE KIT: NOT REQUIRED NOTE: For Canadian installations only, an optional derate (manifold gas pressure reductio
PAGE 10
Air Limited Warranty RGTM Series GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty. *For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate.
PAGE 11
Air Notes RGTM Series 11
PAGE 12
The new degree of comfort.™ In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Fort Smith, Arkansas 72917 • www.rheem.com Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1 Brampton, Ontario • L6Y 0P5 PRINTED IN U.S.A 03/12 QG FORM NO.