Specification Sheet

ManualsBrandsRheem ManualsFurnaceRheem Classic Series: Up to 95% AFUE PSC Motor Multi Position

Rheem Classic

Series

Multi position Gas Furnaces

FORM NO. G11-537 REV. 1

R95P- Series

95% A.F.U.E.†

Input Rates from 40 to 115 kBTU

[11.72 to 33.71 kW]

• 95% residential gas furnace CSA certified

• 4 way multi-poise design

• PlusOne

™

Diagnostics 7-Segment LED all units

• PlusOne

™

Ignition System – DSI for reliability and longevity

• PlusOne

™

Water Management System with patented Blocked

Drain Sensor

• Heat exchanger is removable for improved serviceability.

Aluminized steel primary and stainless steel secondary con-

struction provide maximum corrosion resistance and thermal

fatigue reliability.

• Low profile “34 inch” cabinet ideal for space constrained

installations.

• Blower Shelf design – serviceable in all furnace orientations

• Pre marked hoses – insures proper system drainage

• Vent with 2" or 3" PVC

• Replaceable Collector box

• Hemmed edges on cabinet and doors

• Quarter turn fasteners for tool less access

• Integrated control boards feature dip switches for easy

system set up

• Self priming condensate trap

Air

Gas Furnaces

R95P Series

✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with

Department of Energy test procedures.

Summary of content (12 pages)

PAGE 1
Air Gas Furnaces R95P Series Rheem Classic® Series Multi position Gas Furnaces R95P- Series 95% A.F.U.E.† Input Rates from 40 to 115 kBTU [11.72 to 33.71 kW] ✝ A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with Department of Energy test procedures.
PAGE 2
Air Table of Contents R95P Series TABLE OF CONTENTS Standard & Optional Equipment ......................................................................3 Physical Data & Specifications ........................................................................4 Model Number Identification ............................................................................5 Dimensional Data............................................................................................6 Blower Performance Data ...........
PAGE 3
Air Standard & Optional Equipment R95P Series REMOTE SENSOR DIRECT SPARK IGNITION & REMOTE SENSOR PRIMARY AND SECONDARY HEAT EXCHANGER GAS VALVE AND MANIFOLD IN-SHOT BURNERS DRAFT INDUCER PRESSURE SWITCHES BLOCKED DRAIN SENSOR CONTROL BOARD STANDARD EQUIPMENT OPTIONAL EQUIPMENT Completely assembled and wired; blocked drain sensor, 7 segment LED and marked hoses; heat exchanger; primary: aluminized steel, secondary: 29-4C stainless steel; induced draft; pressure switches; redundant main gas control;
PAGE 4
Air Physical Data & Specifications R95P Series Physical Data and Specifications—Upflow Models U.S. and Canadian Models MODEL NUMBERS HIGH FIRE INPUT BTU/HR [kW] ➀ HEATING CAPACITY BTU/HR [kW] HIGH ALTITUDE OUTPUT 10% DERATE [kW] ➁ BLOWER (D x W) [mm] MOTOR H.P. [W]– TYPE MOTOR FULL LOAD AMPS HEATING SPEED COOLING SPEED MINIMUM EXT. STATIC PRESSURE (IN. W.C.) [kPa] MAXIMUM EXT. STATIC PRESSURE (IN. W.C.) [kPa] HEATING CFM @ .2" [.049 kPa] W.C. E.S.P. [L/s] COOLING CFM @ .5" [.124 kPa] W.C. E.S.P.
PAGE 5
Air Model Number Identification R95P Series Model Number Identification R 95 Rheem Series 95% Efficient P A Motor - Design Series PSC A = 1st Design — 040 1 3 17 M S A Input Stage - Single Airflow Cabinet Width Configuration - S = Standard Revision BTU/HR 3 - Up to 3 Tons 17 = 17.5" Multi-Position Marketing 5 - Up to 5 Tons 21 =21.0" (A - First Time 040 = 42,000 [12.31 kW] 24 =24.5" Release) 060 = 56,000 [16.41 kW] 070 = 70,000 [20.51 kW] 085 = 84,000 [24.62 kW] 100 = 98,000 [28.
PAGE 6
Air Dimensional Data R95P Series UNIT DIMENSIONS (CLEARANCE TO COMBUSTIBLES) MODEL R95P LEFT SIDE 040 060 070 085 100 115 0 0 0 0 0 0 MINIMUM CLEARANCE (IN.) [mm] RIGHT SIDE BACK TOP FRONT VENT 0 0 0 0 0 0 0 0 0 0 0 0 1 [25] 1 [25] 1 [25] 1 [25] 1 [25] 1 [25] 2 [51] 2 [51] 2 [51] 2 [51] 2 [51] 2 [51] 0 0 0 0 0 0 *A service clearance of at least 24" is recommended in front of all furnaces Supply and return depicted as upflow configuration.
PAGE 7
Blower Performance Data R95P Series Air CFM [L/s] AIR DELIVERY EXTERNAL STATIC PRESSURE INCHES WATER COLUMN [kPa] BLOWER SIZE [mm] MOTOR H.P. [W] BLOWER SPEED R95PA 0401317 11 x 7 [279 x 178] 1/4 [187] LOW MED-LO MED-HI* HIGH 732 875 1073 1279 R95PA 0601317 11 x 8 [279 x 203] 1/2 [373] LOW MED-LO MED-HI* HIGH R95PA 0701317 11 x 8 [279 x 203] 1/2 [373] R95PA 0851521 11 x 10 [279 x 254] R95PA 1001521 R95PA 1151524 MODEL 0.1 [.02] 0.2 [.05] 0.3 [.07] 0.4 [.10] 0.5 [.12] 0.6 [.
PAGE 8
Air Accessories R95P Series FOR HIGH ALTITUDES: VENT TERMINATION KITS: = RXGY-E02: Vertical/Horizontal Concentric Vent Termination Kit 2" Pipe (US Only) RXGY-E02A: Vertical/Horizontal Concentric Vent Termination Kit 2" Pipe (US & Canadian) RXGY-E03: Vertical/Horizontal Concentric Vent Termination Kit 3" Pipe (US Only) RXGY-E03A: Vertical/Horizontal Concentric Vent Termination Kit 3" Pipe (US & Canadian) RXGY-G02: Direct Vent Furnace Side Wall Vent 2" or 3" (US Only) RXGY-D05: Combustion Air Drain Kit 2"
PAGE 9
Air Limited Warranty R95P Series GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty. Conditional Parts (Registration Required) ...............................Ten (10) Years Heat Exchanger .........................................
PAGE 10
Air 10 Notes R95P Series
PAGE 11
Air Notes R95P Series 11
PAGE 12
The new degree of comfort.™ In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Fort Smith, Arkansas 72917 • www.rheem.com Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1 Brampton, Ontario • L6Y 0P5 PRINTED IN U.S.A 05/13 QG FORM NO. G11-537 REV.