Specification

PRINTED IN U.S.A. 06/17 WP FORM NO. RR102CE-2 Rev. 16
Water
INTEGRATED HOME COMFORT
Commercial Electric
Booster Water Heaters
INTEGRATED AIR & WATER
INTEGRATED HOME COMFORT
Features & Benefits
Our 10 gallon electric booster will raise
preheated or cold water to 180° F rinse
temperature for compliance with UL
sanitation (NSF5) and all federal, state,
county and local health department
sanitation codes. In addition, these
models can be used as circulating tank
commercial electric water heaters
for gravity or pump circulation to an
auxiliary storage tank. They are available
in 6 kW through 54 kW and in 208, 240,
277 and 480 voltages.
System Sentinel
All electric booster models employ an
element diagnostic panel, utilizing light
emitting diodes (L.E.D.), correspond-
ing to the number and location of each
heating element. L.E.D.’s are energized
when the electric elements are operat-
ing. An unlit L.E.D. pinpoints the exact
location of a non-functioning element,
making element operation diagnosis
simple and positive.
Long Life Tank Design
Proprietary steel formulation with
a unique coat of high temperature
porcelain enamel maximizes corrosion
resistance resulting in a superior tank
design.
Long Life Heating Elements
Separate screw-in type elements
feature a Nichrome wire filament,
embedded in magnesium oxide sealed
in a copper tube to resist water chemi-
cal corrosion…for long element life
and a long life performance. Elements
are directly immersed in the water for
maximum recovery efficiency (98%) and
are easily changed by simply screwing
new ones into the tank.
Integral Fusing
All models have integral fusing for each
element.
Anode rods
Two (2) magnesium anodes are installed
in each tank for maximum corrosion
resistance.
CSA/ASME Rated T&P Valve
Factory installed relief valve
Electrical Connections
Pre-wired, accessible control box
with multiple knock-outs on side in
size selections to match the National
Electric Code. Sizes range from 1/2"
to 2". A grounding screw is provided
for attaching an equipment grounding
conductor.
Single Panel Control Box
It comes with hinged stainless steel
door that provides immediate access to
all electrical components and elements.
Terminal Block
All models are equipped with UL
Listed terminal blocks for simplicity
of installation. The terminal block will
accept either copper or aluminum field
connect wire.
120 Volt Control Circuit
All units are furnished with a fused
120 volt control circuit. All controls
(thermostats, high temperature limit,
etc.) are operated off of this basic 120
volt control circuit. This circuit is created
by an internal multi-tap transformer of
unique design that has four (4) taps for
the primary voltages, 208, 240, 277
and 480.
Warranty
3-Year limited tank warranty
See Commercial Warranty Certificate for
complete information.
Efficiency | All models meet or exceed thermal
efficiency and standby loss requirements of current
ASHRAE standards. (Part of the Federally mandated
Energy Policy Act (EPact)). Also exceeds energy
efficiency codes of all states including California
Energy Commission (CEC).
Safety and Construction | Design certified by
Underwriters Laboratories (UL) to meet UL standard
1453 as electric booster and commercial storage tank
water heaters. All models are UL Sanitation (NSF5).
Certified for 150 PSI maximum working pressure.
Electric boosters are designed to fit under counters
and deliver sanitizing rinse water for all stationary
rack and conveyor type commercial dishwashers
Rheem Booster
10-Gallon Capacity
6kW-54kW
208, 240, 277 and 480 Voltages
Continued next page